Vise Grip HAN91133 Irwin Silver And Deming Drill Bit 33/64 " Dia, 6 " Overall Length 1/2 " Shank Reduced

HS DR 1/2S 33/64

Manufactured to ANSI B94

The spiral design and the mechanical advantage created by the spiral threads allow a greater pulling force to be applied to damaged screws than is possible with conventional straight fluted designs

Produces up to 40% faster removal rates than conventional screw extractors while reducing cam-out and breakage

2, SAE J403, SAE J412, ASME B94

Manufactured from heat treated hardened steel, they are one-piece construction with a hex shank for quick and easy installation

The spiral point angle provides positive starting and removes screws up to 2x faster than a straight bit

It allows you to remove screws that you thought were forever rusted, seized or frozen in place

They have spiral flutes that are designed to eliminate binding and prevent the extractor from slipping out of the hole

A spiral fluting allows the spiral screw extractor to bite quickly and firmly into a damaged screw without camming out

The spiral design gives the screw extractor a better gripping power than other standard screw extractors

Handles feature comfort grips with cushioned inserts for extra comfort and control

92mm) diameter to reduce cam out during removal

IRWIN SPEEDBOR VISE GRIP Spiral Screw Extractors - Screw Ext #6SP Carded

Why struggle with a hard-to-turn screw remover when you can use the spiral screw extractor?

High speed steel spiral screw extractors for removing screws with stripped heads

These spiral flutes continue to clear chips as they are pulled back through the workpiece

The removal of damaged screws is made easier by the spiral design that expands as it is driven and engages the sides of the screw head

Unique spiral flutes allow fast removal of damaged or cross-threaded screws

The VISE-GRIP spiral screw extractor design is made with a body width equal to diameter of the screw for greater holding power, requires less effort for tightening, and prevents over tightening which may cause damage to the screw or workpiece

Screw Extenders allow for use in applications where there is not enough clearance for a standard screw extractor

312" (7

2, ISO 6431 standards and made in the USA with ISO 9001 certified quality control procedures to ensure high quality products

spiral screw extractor is manufactured from heat treated alloy steel and has a 0

Made of heat treated high carbon steel

Vise-Grip™ spiral screw extractors remove stripped and corroded screws in five easy steps

The spiral design allows for a tighter grip and prevents the bit from walking off center

IRWIN SPEEDBOR Spiral Screw Extractors are multi-grooved screw extractors that cut their own threads as they are driven into the workpiece

This spiral screw extractor is specifically designed for removing damaged screws or worn out screw

Spiral screw extractor is the perfect tool for removing stripped screws, bolts and studs

The spiral flutes are specially designed to grip and remove even the smallest and most difficult of stripped screws

Irwin Speedbor Screw Extractor

The wide, flat shanks prevent damage to the head during removal, reducing the chances of damaging another fastener or structure