HYDROQUIP 12-0102F-K Hydro Quip Heater Element: 4.0Kw 220V 10" Titanium

ELE FLO THRU 4.0KW TITANIUM

The ELE FLO THRU 4.0KW TITANIUM by HydroQuip is a 12-inch Titanium Heater Element with a hydro steel housing that is fitted into a 10 x 7 inch protected flange. The ELE FLO THRU 4.0KW TITANIUM by HydroQuip is used in boilers and other heat exchangers where corrosion may occur because of the use of non-ferrous metals. They can be installed in any position, vertically or horizontally,

HydroQuip Heater ELE FLO THRU 4.0KW TITANIUM: NEW VERSION ! Our Newest Element is the best of all worlds & even better! This new titanium element produces a more stable heat as it is designed for use in outdoor environments. If you're into off grid living, this is your element. Great for a variety of 12v applications including: Water Heaters, Saunas, Swimming Pools, Gas Water Heaters, Stoves,

Electric Hydro-Quip heater elements are drop in replacements for existing oil heater elements. The elements are designed to heat all of your hot tubs. This ELE FLO THRU 4.0KW TITANIUM Hydro-Quip heater element is designed for use with the On-Guard titanium filter system. Installation: Put the new element into the filter after removing the old one. All of these elements have a 3" and 4" inlet/outlet hole with threaded nipples on each

Hydro-Quip ELE FLO THRU consists of the stainless steel 12-0102F-K element with 12' power cord, a 4.0Kw 20/30Amp 220V titanium element and a 7" flexible silicone heater hose. ELE Flows Through to allow you to easily remove element for servicing by using the silicone flex hose and also allows for easy cleaning of the stainless steel elements.

This 4.0KW titanium Element is for the Hydro-Quip models: FLO THRU, AGITATOR, ELECTRIC VIBRATOR. This element is also referred to as the 12-0102F-K.

HYDRA QUIP EL FLO THRU is a Titanium element heater that consumes less fuel than standard steel rubber elements. The titanium element is cleaner and easier to control through the use of a pilot light and on off switch. This unit also comes with an anti-corrosion porcelain end cap for protection against harsh water conditions, visual defects or damage from dirt.

Quickly raise the water temperature in your hot tub so you can dip in sooner. The HYDROQUIP HEATER ELEMENT is compact and made of titanium for a durable, rust-resistant design. When combined with a water circulating pump, the HYDROQUIP HEATER ELEMENT significantly raises the temperature and flow rate of your spa water. Features: A durable, 100% titanium element 4.0kw of heater power Fixed lead  in wire 8k plug