ICM Controls 66135 3-Phase Monitor, Adjustable 190-480 VAC, Plug-In Style

Adjustable 190-480 VAC, phase loss

Icm Controls 66135 3-Phase Monitor, Plug-In Type, Adjustable 190-480 VAC, NEMA 1 enclosure

Adjustable for power ranges from 190VAC to 480VAC, ICM Controls' 66135 3-Phase Monitor is built with built in protection against phase loss. With a compact design that can be mounted in standard gang boxes, the rugged 66135 will ensure all your electrical systems are under control.

The ICM 3-Phase Monitor is designed for long-term unattended monitoring of 3-phase AC power systems. It will detect the dropout of any single phase and trip an atm output when any two phases go out simultaneously. Adjustable from 190 VAC to 480 VAC, the model 66135 is intended for plug-in style use with power strip or surface mount transformer type models. An audible alarm sounds when 3-phase power loss occurs and is extinguished upon restoration of 3-

The ICM 66135 200-480 volt monitor is a plug-in style monitor that also features adjustable phase loss. It features a current selector switch ranging from 0 to 2000 Amps, a frequency selector switch ranging from 50 to 60 Hz, and a phase/ground selection switch for phase loss protection. This monitor features 10 LED lights for easy monitoring of power supply status.

Monitor incoming voltage to one or more 3 phase loads. Range is from 190-480 VAC. Input voltage must include nominal 208 VAC with two isolated neutral legs and three 120 volt phase legs. Does not work with split phase loads at other than the "Baseline" 208VAC nominal input, as indicated above. Voltage drop is adjustable up to 5% of the incoming line voltage.

The ICM-66135 is an adjustable, 3-wire monitor that can be configured for use on phase loss functions. It may be adjusted from a relative phase angle of 0 degrees to 180 degrees and is suitable for applications that require overload protection against movement of motor phases. The ICM-66135 is UL/cUL listed as a “plug-in” type of circuit-breaker in the US and Canada and can be used on other equipment types by utilising an appropriately rated

ICM Controls® model 66135 is a 3-phase power monitor that detects and indicates phase loss. The compact, cost-effective meter features an LED bar graph display, with a manual calibration knob and three-phase mode/phase loss switch. The unit requires 115 VAC to 240 VAC 480 VAC voltage, 100 MilliOhm resistance, and is adjustable from 50 to 250 milliAmperes (mA).