IDEC Relays RR2P-UAC24V IDEC 24V 10A 8Pin DPDT Relay

IDEC 24V 10A 8Pin DPDT Relay

The IDEC 24V 10A 8Pin DPDT Relay comes with a wide operating temperature range of -25 to 70 °C, and features four 2-position relay contacts.

The IDEC 24V 10A 8Pin DPDT Relay is used for switching mains voltages up to 236V @10A. – Output: 8Pin DPDT.

Idec Relay RR2P-UAC24V 24V 10A 8Pin DPDT Relay

The IDEC RR2P-UAC24V Relay is an eight pin DPDT dry relay for 24V AC/DC rated at 10A. The order code RR2P indicates that the relay contacts are normally open (N.O.) and when power is applied, they close together (make).

The IDEC RR2P-UAC24V IDEC Relay is a DPDT (Double Pole, Dual Throw), 24 VAC relay. It can be used for switching power supplies or motorized valves. The main features are the 10 Amp current capacity, 12VDC coil voltage and body, 8 pin round shell and product code RR2P-UAC24V .

The IDEC RR2P Series are 24Vdc 10A relay's. The coil voltage is adjustable, normally 2-24Vdc and the trigger voltage is adjustable, normally 3-28Vdc.

The IDEC RR2P-UAC24V is a brand new relay which uses 1.5VA (Max) 24V AC coil and 10A contact. The function of this relay is to control small amount of AC or DC devices with current lower than 500mA.

IDEC DIN mount Relay equipped with a screw terminal block and built-in manual changeover contacts; Mounts to a DIN-rail or controls up to 10A 24VDC loads; Dimensions: 3.0" x 1.7" x 0.9"

The IDEC Relays RR2P-UAC24V relay is for switching higher current in both AC and DC drive. The relay can easily connect to the control menu of any device, allowing you to use all of your existing electronic devices without modification, saving you from making purchases of expensive electronic devices.

This Relay is designed to operate with 24V DC supply voltage, the power will be through the relay coil and the load.

Provides both N.O. & N.C. operation modes and comes pre-wired with standard terminal block connectors.