Johnson Controls DMPR-RS312 212F FUSE LINK 212F FUSE LINK

212F FUSE LINK

The 212F FUSE LINK works with the RS-212 control module. This module is compatible with 211, 213, 214, 215, 216, 217, 224, 226 and 227 series systems. The 212F FUSE LINK is a safety device used to protect the system from overcurrent conditions.

The 212F FUSE LINK with Johnson Controls is designed to protect the unit in the unlikely event of a short circuit in an inductive load. It has no moving parts to wear down or break. With simple installation, it is suited for most overload protective situations.

The Johnson Controls DMPRRS-312 212F FUSE LINK fits in 208 volt cooling panels. This tool is designed to connect the bus bar to the fuse link.

With the current explosion in battery-powered devices, an inverter is a must-have accessory to power electronics in your car when conventional power sources are not available. The 212F Fuse Link™ inverts 12-24 DC volts to 120 AC volts to power any standard 120 volt AC device. You'll soon wonder how you ever got along without it when you're on the way to your next destination!

Safe power when you need it. Uncompromised performance when you don't. These are the guiding principles of Johnson Controls in developing our Generator Transfer Switch (GTS). Our G-Rated circuit breaker in the 212F FUSE LINK version meets all UL 489 standards. It is rated in accordance to IEEE 1547 , UL 489, CSA C22.2 No. 250, Factory Mutual Standard Class 2400, NFPA 70 , and Intrinsically Safe for use with listed intrinsically safe field devices only.

The 212F BLINKING circuit breaker is a 3-phase AC Form C thermostat control fuse link with a 12–pack for a load of 360 amperes at 600 volts. The main circuit breaker of a meter panel or motor control center.

Designed for use in heating, ventilation and air conditioning (HVAC) systems with the most demanding performance needs. The Johnson Controls DMPR-RS312 212F Fuse Link is designed for use with Series 4000 indoor units only.

A Johnson Controls DMPR-RS312 Fuse Link 212F is the correct replacement element for the following models of Johnson Controls Fuse Panels:

The FUSE LINK is a family of switching products that consist of power board, units for branch circuit protection, units for selective circuit protection, units for line circuit protection and units for three-phase circuit protection.

Class 10K Fuse Link, suitable for use in Johnson Controls Power Distribution Panels.

A fully assembled module with fuse link, H/L-HV power contactors and solid state relays. This is most commonly used in a commercial building to transfer power from a large commercial service panel to a local distribution panel that feeds a bank of fluorescent lights, fans, etc. Typically used in a commercial building to transfer power from a large commercial service panel to a local distribution panel that feeds a bank of fluorescent lights, fans, etc.

The NarrowLine™ Digital Meter is a revolutionary advancement in meter design. For the first time, the electronic circuit is fully enclosed. This state-of-the-art design combines simple operation and maintenance with an attractive new styling that is available in 7 different colors.