Johnson Controls F-1000-14 COMP SEALING CAP 1/4 *** MUST SELL MULT. 50 ***

1/4" COMP SEALING CAP

This listing is for fifty (50) new Johnson Controls F-1000-14 COMP SEALING CAP. Part number is: F-1000-14 and is also known as: COMP SEALING CAP, F-1000-14, F1000 14, F 1000 14 . This seals the bottom of outside air dampers. It is 1 ½" in length and has a 3/4" outer diameter, and a 1/4" inside diameter. The thickness of this cap is ¼".

Cap 1/4 Compound Sealing Cap This cap is the replacement cap for the 1/4" Johnson Controls COMP Sealing Cap Assembly #50-1500-1404. Applications include refrigeration, convenience centers, floor care vending machines, solar hot water heating systems, laboratory fume exhaust systems, etc.

Durapax F-1000-14 COMP SEALING CAP 1/4"---50 EA/PK

This Johnson Controls F-1000-14 COMP SEALING CAP 1/4 is designed for heat sealing equipment. It has a 300 psi compression rating, brass body with steel collar, non-sparking polycarbonate tip, and high temperature silicone seals. Compatible with HX100 seals. This sealing cap is sold in various quantities.

Our COMP Sealing Cap is an outdented, solid, molded PVC cap with a stainless steel bolt and nut assembly. It seals 1/4". This product is specifically designed for use on the F-1000 enclosure to prevent entry of dust and debris.

This is a 14 oz. F-1000-14 COMP SEALING CAP that is NEW. Johnson Controls Part Number: F-1000-14, T1053250.

The F-1000 14 COMP SEALING CAP allows for easy sealing of small holes in commercial refrigeration equipment, air conditioning duct work, HVAC systems, domestic refrigerators and freezers, walk in coolers and other systems.

The F1000-14 Comp Sealing Cap is molded from rigid Kraton® 50 to withstand severe environments. It has an X-shaped design that provides a positive seal. It stacks together with other caps for compact storage.

The F1000 Series Cap provides an improved system seal and improved finger stock seal for each size. The finger stocked cap design has finger stock seal and a pin locking flange to replace the finger stock bolt and bolt guard collar assy..

The F-1000 Series is a fully automated, cost effective solution to the problem of non-hermetic sealing using traditional hand processes. The revolutionary design of this approach offers a maintenance free, low-pressure operation with a reduced seal gap. The F-1000 is a one piece blown capping system where the gasket and seal are attached to the cap in one pass. This unit can be applied to all types of cans from spray paint cans to 90+bbl IBC totes.