Johnson Controls F261KFH-V01C SPDT LIQUID FLOW SWITCH LOW FLOW RATE 3/4 X 3/4 FEMALE NPTF FTGS REPLACES F61KD-4C

"FlowSwitch-lowflow 3/4""Nema3R"

The FlowSwitch-lowflow 3/4""Nema3R" is designed to control liquid flow in hvac ventilation systems. This product is designed to replace 3/4"" parallel x 3/4"" parallel normally closed low flow rate valves.

Johnson Controls flow switch low flow 3/4"" Nema 3R replaces F61KD-4C. The pentagon base of the Johnson Controls flow switch Low Flow model F261KFH-V01C is compatible with the Tork Master series valves, Nernst Electric motorized gate valves, MWC Low Energy Transfer Valves, RIT Low Energy Transfer Valves, among others.

FlowSwitch® Low Flow® is a low flow controller that detects flow rates below 1.0 GPM. It should be used in any application where it is necessary to detect flow drops to turn equipment “ON” or “OFF”.It can be used in applications that are controlled by other inputs, such as the activation of other devices, normally “ON” indicators, or intermittent operation. The switch will detect and immediately respond to a drop in the fluid flow and provide ON and OFF outputs.

The FlowSwitch SPDT LIQUID FLOW SWITCH LOW FLOW RATE 3/4 X 3/4 FEMALE NPTF FTGS is small, lightweight, and easy to install. It has troubleshooting capability that makes it an ideal replacement for other manufacturer's switches. The flowmeters are compact and can be mounted in many locations. They are available in either flange or back mount configurations.

FlowSwitch® is a rugged, compact, high/low flow switch to control or monitor liquids or gases other than water. FlowSwitch® is designed to perform over a wide range of operating pressures, coefficients of friction and velocities.

The F261KFH-V01C SPDT LIQUID FLOW SWITCH LOW FLOW RATE 3/4 X 3/4 FEMALE NPTF FTGS REPLACES F61KD-4C is a genuine replacement product manufactured by LITTELFUSE. This product is designed and manufactured according to strict ISO 9001 standards and procedures, resulting in the highest quality possible.

The FlowSwitch provides a low flow alarm only, which interrupts the power to an electrically driven pump when flow to the pump is reduced below a pre-programmed rate of flow. It requires no pressure switch and no external compression system. FS-Series switches are non-stacking and suitable for use in gravity feed systems or positive displacement systems if flows do not exceed 20 Gallons per Minute (GPM) and pressures do not exceed 150 PSI.

This electric liquid flow switch is used to stop the flow of liquid when a preset level is reached. This low flow rate switch is used when a small amount of flow must be controlled, such as when dispensing water from a cooler or when gravity feed tank levels are to be monitored.

Switch will trip at 10 GPM and open again at 15 GPM.

A Liquid Flow Sensor is an electrically operated switch that detects the presence of water or other fluids. It is used to switch power or control signals to machinery or equipment attached to its terminals. Its main purpose it to detect flow rate, whether it needs to control status, reset, or increase flow.

Flexible solutions in flow control

Johnson Controls is a leading manufacturer of innovative HVAC systems, climate controls, building automation systems, and life safety products. Johnson Controls employs over 122,000 people in more than 125 countries, with sales of $26 billion in 2012. . We are the largest manufacturer of HVAC systems in the world