24v OnOff/Fltg 35# 60sec NSR
The M9104-IGA-3S 24v OnOff/Fltg 35# 60sec NSR is a compact pneumatic actuator for use in dirty, extreme & harsh environments.
The Johnson Controls M9104-IGA-3S 24v OnOff/Fltg 35# 60sec NSR effectively controls the status of air-cooled, non-hermetic centrifugal compressors. It provides control power and directional control on air motors and auxiliary equipment such as fans and solenoid valves.
The Johnson Controls M9104-IGA-3S 24v On/Off/Flo 150# 1.5s NSR 35# 60sec delay off is a 10 circuit ac fan delay off timer that will operate from a 40 watt to 250 watt resistive loads. This product is the equivalent of the IO-AG 24VDC XR Series timers, part numbers 118224, 118214, 117814, 117714 and 117724
Designed with the Johnson Controls MCB/MCC Series Low Voltage Controller. Use with an on-off or on-off/fltg thermostat to provide heating and cooling to the desired set point on hot water heaters, heat pumps, coolant heaters, boilers, or other loads. Spring Rate of 35# @ 60 seconds. For Direct Wired Low Voltage Systems only. Contact factory for Low Voltage Heating Controllers, wiring instructions and additional accessories.
The M9104 Series available in 3S and 4S configurations, is specifically designed to minimize in-rush current and the inrush inrush current cycle (I2t) during plug-in. These 120VAC plug-in thermostats provide I2t currents of 40A and 60A for 3S and 4S, respectively.
Designed to meet the demand for a new, high performance lead acid storage battery that is smaller in size and lighter weight. The 8' stripe down the side of this battery is blue in color and contains a security bar code.
The M9104-IGA-3S is NEMA 3R-rated for inside walls, partitions and ceilings. It has an operating temperature range of 40°C (104°F) to 50°C (122°F). It has a very slimline controller that operates quietly without vibration. The unit is field convertible to 120 VAC - use 853640 P/N YEG-32N0-120PV.
Supplied by Johnson Controls, leading suppliers of HVAC systems and controls for more than 100 years, the M9104-IGA-3S offers simplified, faster installation. Combined with their high specification, IP65 rated controls backed by Johnson Controls industry-leading five year warranty, the M9104-IGA-3S will meet all HVAC system performance needs.
Johnson Controls is the leading manufacturer in Automotive HVAC and Electrical Systems. Johnson products can be found in over 500 applications with over 500,000 vehicles made every year where the customer demands high quality and dependability. $ $ $ $
System is a space-saving, totally integrated, direct replacement battery system. It is shipped complete with battery, heavy gauge steel mounting structure, bus duct, integral cabling harnesses with molded connector terminals and is fully tested prior to shipment. The versatility of the System enables either manual or automatic testing. It meets fully regulated requirements for UL 896, UL1741 requirements for prevention of electrolytic explosion hazard in hazardous locations with intrinsically safe barrier protective devices. For additional details see the M9104-IGA catalog in the Johnson Controls literature section on this website
The M9104-IGA series is Johnson Controls' premier iModule controller, designed to meet the most demanding of energy management system requirements. Designed for high efficiency, the M9104-IGA series features multiple analog inputs, solid state relays with an integrated power FET that allow for up to 200 Amps of load current and includes flash memory that easily allows upgrading firmware via the USB port.
The versatile Johnson Controls® CL-Class® Series II proportional control valve w/ dual float, mount & terminate kit offers an additional head supply input. It is the default pump module for CL-Class® Series II proportional valves. It can also be retrofitted to CL-Class® Series I Proportional Pneumatic Valves by using CL-Class® Modules Retrofit Kit. For more information, refer to CL-Class® Manual 06-0311/2007 pg 11 under the General Information section.