Johnson Controls M9203-AGA-2Z 90s 24V 2POS/FLTG S/R ACTUATOR

90s 24V 2POS/FLTG S/R ACTUATOR

90s 24V 2POS/FLTG S/R ACTUATOR by Johnson Controls M9203-AGA-2Z

The Johnson Controls M9203-AGA-2Z 90s 24V 2POS/FLTG S/R ACTUATOR enables precise control of position, pressure, temperature, and voltage transmission. This actuator works with PLCs to convert process signals into motion, positioning, positioning and pressure control valves, or 4-20mA output. It also has both linear and rotary motion capabilities.

The 24V 90s 24V 2POS/FLTG S/R ACTUATOR, manufactured by Johnson Controls is a 24 Volt - 2 Pole - 3 Wire control that activates left or right. It has a full range actuator type and a Normally Open mounting type. The maximum current rating of the control is 5 amps.

The Johnson Controls M9203-AGA-2Z 90s 24V 2POS/FLTG S/R ACTUATOR is a 2 pole, 0 position normally closed (NO), single throw (ST) actuator with limit switch. The double throw (DT) version switch has two intermediate states, one housed in the fully off position, and one housed in the fully on position. The paddle can be used to change between intermediate states. The center distance of the actuator is adjustable within certain limits to set trip point distances.

The ACTUATOR M9203 is a 24V, 90-degree rotating actuator for use in commercial refrigeration applications. This snap-in 90° actuator replaces OEM part numbers 025-1033-001 & 026-1432-002. The Johnson Controls 90s 24v 2Pos/Fltg S/R Actuator - M9203 control operates drawers, ice bins and meat bins that require tray rotation or door positioning.

Actuators perform two-position operation, toggle or limit with spring return. These actuators are designed to work with Johnson Controls' 90 Series Microprocessor base controls, including the 90s series 24-volt base control with digital user interface. The durable Actuator is constructed from a powder coated cast aluminum housing and stainless steel shafts.

Johnson Controls M9203-AGA-2Z 1/4" NPT 24VDC 2Pos/2Reverse Actuator, Nitrile Seals. Includes prewired current limiter 1/4" NPT 24VDC 2Pos/2Reverse Actuator, Nitrile Seals. Includes prewired current limiter 1#8211;6#8211;18#8211;36F-04

This Johnson Controls product is an adjustable position actuator. It is a self-contained motorized actuator used to control electric heat, ventilation and air-conditioning (HVAC) equipment on a range of circuit breakers and controls. The 24 volts DC coil provides a 2-position output of spring or spring/return which can be used up to 15 amps.

The M9203-AGA is a 24 VAC actuator with 2 unique position settings in either the 0 to 10 VDC or full line position. The M9203-AGA is RoHS, REACH and WEEE compliant.

The M9203-AGA-2Z switches from left to right control the ACANA AC, ACARA AC/ Heat Pump and heating only after the compressor kicks in and shifts to cooling mode and vice versa. Each Actuator has a female latching receptacle and a 24 Volt coil rated at 2.2 Amps at 0.5 Ohms resistance. This item is new and in excellent condition.

The M9203 master actuator controls the blinds and the curtains in 1 position. The master actuator is used in applications where one user wants to control either blinds or curtain systems. It has a low voltage DC output and 1 to 2 outputs. The master actuator comes pre-wired with a conduit box and a pan and tilt bracket system. Master actuator is UL and C-UL listed and is ideal for retrofitting into an existing home that already has a previously installed 24V, 3 wire system installed by a licensed electrician or into new construction requiring field installation of electrical wiring.

Also, the STO stop feature requires no switches or jumpers to be set, making this STO stop device a reliable solution for your control system.