Johnson Controls P-7100-1 P/E SWITCH 20A AT 480V P/E SWITCH 20A AT 480V

P/E SWITCH 20A AT 480V

Our Johnson Controls P-7100-1 P/E SWITCH 20A AT 480V switches are available in a variety of different models and voltages for purchase.

Our P-7100-1 P/E SWITCH 20A AT 480V switch is a 1 to 2 pole changeover, single throw Snap Action type switch with Line connection on L1 & Line Connection on L2. The NC contacts are normally closed while the NO contacts are normally open.

Johnson Controls P-7100-1 P/E SWITCH 20A AT 480V Module type P/E switch Capacity rating 20 A Nominal voltage (V) 480 Mounting method S2D temperature class 87/EN 60947 Terminal arrangement (minimum) 2 screw terminals on circuit side Operating temperature range -25 ... +80 °C Degree of protection IP 67

The P/E switch features the durability of compact electronic components, while also facilitating energy efficient control. This reliable switch is suitable for automated or remote applications, offering contact ratings up to 20 amps at 480 volts AC. It features force-operated mechanical latching contacts rated at 20 amps at 480 volts AC.

A P/E switch is a low voltage electric switch used to control electric heating elements and devices such as lamps. It is installed between the power source and the device to be controlled. P/E switches are rated for 125 or 250 volts and operate on AC voltages from 7 to 13,000 volts at 50 to 60 Hz.

Our P-7100-1P/E switch has a handle, which is color-coded red or blue that makes installation easy and quick. Like all our products, it is constructed from premium steel and quality copper terminals to maximize its lifespan. Its case is made from aluminum alloy with a powder coating to provide a corrosion-proof exterior. With a 20 amp rating, this switch is designed to be used in a single circuit breaker panel configuration.

Provides a means of manually controlling a Power Paddle or Power Exhaust Fan System, When the switch is not energized, the solenoid coils return to a non-energized state, thereby closing the contacts and making connection to power. These low voltage switches are designed primarily for use on air conditioning and heating systems. The switches include suitable protection against overload and short circuit for II II as well as transient voltages .

The P-7100 series of circuit breakers are designed to operate in three-phase SELV power systems, rated for 20 amps up to 480V.. This item is intended for installation with equipment approved for connection to the electric power supply; it may not be used with equipment that uses or requires non-SELV (i.e., full-watt) power.

The P-7100 Series of switches is the new generation of power control products. They feature programable logic controller (PLC) architecture with its integrated single-chip microcontroller, which simplifies field wiring and leads to system performance improvement. The latest Pentium processors are used for more advanced applications. Having clearly defined processes, advanced communication software (oneCPR2), and an IO module function, the switches have excellent control performance.

The P7100 series provides point-of-load switching. Johnson Controls' P7100 series non-volatile, programmable electronic circuit breakers are plastic enclosed switches for safe, efficient, visible switching of loads wired in either delta or wye at 480 volts.

The Johnson Controls P-7100 Series time delay pressure switches are microprocessor based, electromechanical devices that are internally calibrated to provide an accurate time delay. The time after the initial signal is applied during which switch operation will initiate is determined by a preprogrammed value stored in the control's internal memory.

Trust Johnson Controls for the most energy efficient electrical solutions available — and let us provide you and your business with unmatched service and support, backed by over a century of expertise.