Johnson Controls P100AP-15 25lbCutIn 10lbCutOut PresCntrl

25lbCutIn 10lbCutOut PresCntrl

Our Johnson Controls P100AP-15 25lbCutIn 10lbCutOut PresCntrl is a 15-channel preset proportional climate control system that provides precise temperature settings to accommodate your comfort needs. This quarter-horsepower system continuously monitors the system's load for accurate temperatures. You'll also enjoy greater energy efficiency with our system's warm-start capability, which allows you to heat the area only when needed.

The Johnson Controls P100AP-15 25lbCutIn 10lbCutOut PresCntrl is a wafer-type, Low Impedance(1) pressure control/relay with a maximum 100Amp maximum load current and a 20 to 120VAC or DC auxiliary contact input voltage. It has a current drain of 5mA minimum at 5VDC and 15mA minimum at 30VDC. It normally draws zero output (5VDC) minimum with zero load current.

The Johnson Controls P100AP-15 25 lb cut-in 10 lb. cutout pressure switch is an on-off spool-on/spool off device designed for use with multistage, backpressure or two stage centrifugal, turbine or reciprocating compressors. This rugged contactor provides rugged service in applications where the presCntrl swtCh

The Johnson Controls P100AP-15 25 lb Cut-In 10 lb Cut-Out Presense Control is able to provide up to two zones of heat and air conditioning control. It is able to support up to 3 stages of cooling and up to 2 stages of heating. The Johnson Controls P100AP-15 comes with a 15 amp electrical rating and that measures 4"H x 12"L x 3"W.

The Johnson Controls P100AP-15 Series ENVIROCON is a 100 amp, 15 kA rated control that operates single or three phase electric equipment under constant voltage or variable frequency drive applications. Series ENVIROCON has many features including: 25 lb Cut In / 10 lb Cut Out, Remote indicator lamps, Test and Resume input, Remote trip indicator lamp and relay.

Our P100AP-15 is a 2-stage Universal AC control designed to replace small and large air conditioning and heating systems, using a variety of refrigerants. It operates on the principles of voltage control, cut-in and cut-out pressure settings and cycling thermostat.

The Johnson Controls P100AP-15 15A/25A/10A Portable Controller is used for applications requiring greater accuracy and control of the Temperature, Humidity, Ventilation, CO2, or Air Pressure. The controller has 2 temperature outputs, 3 ventilator outputs, 3 humidity outputs, 1 CO2 output. It has a 15 amp heating element output relay.

What's in the box: P100AP-15 250V 1 Phase Air Pressure Controller

A fast response control to provide excellent comfort for residential and light commercial heating and cooling equipment. The Johnson Controls (NYSE: JCI) P100AP-15 is a fast-response temperature control designed for Residential and Light Commercial Heating and Cooling Equipment. The Compact Apartment Preset Control is non-programmable, internal bypass mounted, class AB/compact design.

Exclusive P-Term technology provides the smallest and lightest PID controller available.

The P100AP-15 control provides 10 amps of cooling and 15 amps of heating in a floor distribution system. Includes an overload protection device and flush mounted terminals for ease of installation and reduced amp breakers in the electrical box.

Using a Johnson Controls gas or oil furnace control can help you maintain and operate your heating and cooling system more efficiently. Properly tuned, your system won't cycle as frequently – which could save you up to 10% on your energy bill – and the right control could also make it easier for you to stay warm or cool when you want to be.