Johnson Controls P100AP-355 EncapPressControl

EncapPressControl

EncapPressControl pressurizes and coats large metal and plastic components in one step, reducing production costs and conserving energy. The P100AP-355 EncapPressControl features a 360° Frame, which provides extra coating even when part is rotated 15° from horizontal. The leading-edge 360° rotating spray bar is ideal for high volume coating of long, large diameter parts such as motor housing, gas tank, and lawn mower decks; and the Parker Indexing Spray Bar assures that each part receives an even coat – perfectly matched to your application – without multiple spray bars and their associated parts and costs required by

The EncapPressControl by Johnson Controls is a sensor and control technology that controls electric heat blankets and heat presses. The system works by sensing the amount of heat that is needed and controlling the process to create a perfect enamel spray every time.","The system is best-suited for large shops and exteriors but can be used in interior parts as well."

New EncapPressControl system encloses the entire controller allowing for a more durable and impact resistant unit while also reducing weld flash for a cleaner design.

The P100AP-355 EncapPressControl is a miniature, multipurpose dead blow hammer for punching out penetrants from electrical enclosures. It has a 48 mm diameter head and a 600 g impact energy. The flexible ergonomic handle can be held comfortably in any position.

Use the EncapPressControl for more accurate assemblies of encapsulated electronic components using pre-press plating processes. This press features a clear pressure head, allowing you to see the interface on your materials during load, unload or purge cycles.

Johnson Controls P100AP-355 EncapPressControl. It is designed to go inside the evaporator coil and sit flush with the bottom of the coil.

JCI's P100AP-355 EncapPressControl thermal spray system is uniquely designed to encapsulate and control even the most hazardous contaminants such as lead, mercury, silica glass and micro-powder. The low pressure operation (200 psi) provides a steady output of particles and powder to coat surfaces.

The Johnson Controls P100AP-355 EncapPressControl is a 355 ton electric pump designed for commercial and industrial cooling garment to be used as an air-conditioning machine. 4.56 FCU to be sold separately from pump

Designed for buildings with environmental air pressures of 100 to 500Pa (14.5 to 69.2 inches of water column), the EncapPressControl delivers optimum performance and operational savings for mechanical and natural ventilation and freeze protection systems. With its innovative, proprietary reduction-in-pressure technology, freeze protection can be provided without drain pan heaters and related components, resulting in significant long-term energy conservation and cost savings versus traditional systems.

The P100AP-355 is the industry's most advanced enclosure system for advanced press control applications. This fully integrated, full touch system offers both point-to-point mapping and switchless control. All with our robust, easy to use PC software.

Johnson Controls HVAC products offer advanced advancements and energy-saving technologies to regulate the flow of heat and air conditioning. They provide replacement parts for: furnace motors, motors, motors, motors, motors and motors.

Pressure relief valves are used in refrigeration service equipment to reduce operating pressures caused by excessive refrigerant charge. This low cost solution is designed for backup for critical applications. It can be used as an integral part of a control system, or as an additional safeguard. The unit employs a pilot-operated pressure relief valve with manual reset. The pilot is activated by pressure applied to the pilot port or by an electrical pilot relay that is activated by means of 1-1/8? NPT connection to system pressure. Safety value provided for pilot supply line is 60 psi (4 bar) gauge. Listed for use up to