Johnson Controls P100AP-4 250lbCutIn170CutOut Presctrl 250lbCutIn170CutOut Pres

250lbCutIn170CutOut Presctrl

"250lbCutIn170CutOut Presctrl"

Our 250lbCutIn170CutOut Presctrl parameter is a direct replacement for the older models of Johnson Controls P100AP-4 250lbCutIn170CutOut Presctrl. It's features include: marine grade anodized aluminum mounting pole, sturdy mounts and brass locking pins, no wiring or additional electrical connections needed, variety of colors to match your boat, easy to read cut in and cut out rotation markers

This Johnson Controls 250lbCutIn170CutOut Presctrl Power Center - Mechanical Control features a rating of 100% duty, is designed for use on 240V single phase services, has a pull-handles on the front and back door that is attached with a locking mechanism to prevent unauthorized access. The device's dimensions are 36" Length x 29" Width x 29" Height with a cut-out dimension of 28" Length x 20" Width x 26" Height and cut-in dimension of 36" Length x 24" Width x 26" Height.

P100AP-4 250lbCutIn170CutOut Presctrl

The Johnson Controls P100AP-4 250lbCutIn170CutOut Presctrl is a two-speed, three phase permanently lubricated compressor. This model features four cylinder technology delivering a 25 year warranty which includes parts and labor. It also offers up to 30% more power for coolers with higher capacity requirements or more space available in the evaporator. System components are factory installed and wired for easy installation into pre-engineered, pre-cut kits.

The Johnson Controls P100AP-4 250lbCutIn170CutOut Presctrl (P100AP-4) is a single pole, power disconnect with overload protection featuring an adjustable pole handle. The P100AP-4 power disconnect can shut off power up to 250kA at 170kA fault while allowing operation up to 250kAmax. The P100AP-4 features external power monitoring, automatic arc fault detection, and manual and automatic arc fault clearing. In addition, this pole disconnect provides both visual and audible indications of loadbearing such as overcurrent on the outgoing neutral or ground faults on the incoming

The P100AP-4 Presctrl is a built in 4-zone control and is compatible with the AirTouch series. This model is a 250 volt, 1 phase, 100 amp. The 250000 BTU unit features an easy access/easy install IP23X enclosure with a flush mounted 2 speed Pioneer Scroll compressor motor. The high performance Pioneer scroll motors will provide years of trouble free operation. The P100AP-4 will allow your home to be beautifully comfortable on your schedule.