Johnson Controls P20CB-4 LOW PRESSURE CONTROL

"20""Hg/100psig

Johnson Controls P20CB-4 Low Pressure Control regulates the pressure of water supplied to potable water systems to a low pressure of 20"Hg/100 psig. Applications for the P20CB-4 include single or two-pipe potable water systems that have been designed to withstand low pressures of 20"Hg/100psi. The control may also be used in water distribution systems with extremely high demands, such as fire sprinkler installations.

The Johnson Controls P20CB-4 Low Pressure Control has a maximum pressure of 100 psig and a minimum pressure of 20 Hg.

Johnson Controls P20CB-4 Series Low Pressure Control has a maximum limit of 20"Hg. It is designed for use on air compressors only. The low pressure control includes a thermowell rated to 190°F (84°C), 4.6 lb airflow limitation, 1/2" NPT connections, 1/4" NPT drain, 1/4" NPT clockwise valve, 1/4" NPT counterclockwise valve, 8' power cord with plug, 2" O.D. inflation hose, and an 800 gph pump.

The Johnson Controls® P20CB is an ultra-sensitive, analog controller for low pressure applications - about 6 in water column (1mmHg) to 4 in water column (7.2mmHg). BASIC 29459 Controller Enclosure (Mounted on Panel; 10 position terminal strip; 24VDC power; complete with terminal screws & nuts; Pressure set point adjustable in 0.1 in H 2 O divisions)

Complying with the highest NATE certification as a low pressure control, this Johnson Controls P20CB-4 unit is intended for use in either residential or commercial environments where pressure must be precisely monitored and controlled across a broad range of properties. The units are packed with dozens of features that ensure durability and long life. There's a 10 x 4 1/2' housing made up of Type 200 Stainless Steel for a durable unit that resists water damage, and a built-in adjustable regulator that provides you with precise control over the flow rate. Order today!

Highly-accurate, economical pressure controller for steam, air, and other gases. It is designed specifically to meet today

P20CB Series Low Pressure Controls offer the highest level of performance and reliability in a compact package. The direct acting valve, with consistent operation from 25% to 100% load, ensures stable control over changing process demands. Rugged operating systems can be customized for a variety of applications including condensation, refrigeration, air conditioning, and steam.

A complete range of positive, negative and combination pressure controllers for residential, commercial and industrial applications where service is limited to a maximum static pressure of 4" w.c. (0.1mpa) at 0" static/vacuum gauge. The regulators meet or exceed applicable codes and standards set by Underwriters Laboratories Inc., The Canada Gas Association, the American Gas Association and the Compressed Gas Association . The Johnson Controls P20CB-4 low pressure regulator provides a 2000:1 turndown ratio with a minimimum flow rate of 0.3 gpm (0.1 lpm). It has a

Pressure reducing valves (PRV's) and pressure controls stabilize and block low and high pressures on refrigeration and air conditioning equipment and processes. Pressure and temperature control equipment is operated with a low range of 0-5 PSI, High range of 0-100 PSI, Temperature Range: -40 to 250 deg. F.

The P20CB-4 four-wire, quarter-turn solenoid valve is designed for use with the complete line of quarter-turn pilots by Johnson Controls, including the V10 pressure pilots. The P20CB series provides an indication of system pressure, enabling you to set up your system for maximum efficiency.

The 20CB control is designed to control air volume and does not feature an unloader feature. This model is used in applications where the pressure drop is acceptable.

Low pressure control is a direct suction, single stage diaphragm style air compressor that can be used for general industrial applications to operate pneumatic equipment with dry air.