Johnson Controls P266ACA-100 , Inc. P266ACA100 208-240V FAN SPEED CONTROL

208-240V FAN SPEED CONTROL

The Johnson Controls P266ACA100 208-240V FAN SPEED CONTROL is a suitable replacement if your existing speed controller has become inoperable. This 208/240V AC fan model is designed to provide high quality performance for longer period of time. It features an in-built thermal overload protection function that protects the controller against circuit overloads during start up, operation or when power fails. This desirable feature minimizes damage to the internal components of the unit and allows it to be used over a wide range of drive conditions. The overall efficiency of the 208/240V AC fan model is further enhanced by the low

The Johnson Controls P266ACA-100 , Inc. 208-240V FAN SPEED CONTROL is designed for use in commercial and industrial applications. This control has a front access terminal cover, complete factory set up, and will accept 0-10V, 4-20mA, resistor (1-5W) input signals.

The Johnson Controls P266ACA-100 208-240V FAN SPEED CONTROL works with fans requiring DC voltage to control speed. The DC voltage required is often 12 or 24 volts DC. The fan speed may depend on the installation, but the typical rpm at 12 VDC is about 2000 rpms and at 24 VDC about 1,500 rpms.

Johnson Controls P266ACA-100, Inc. P266ACA100 208-240V FAN SPEED CONTROL is a 208-240V general purpose fan speed controller with an adjustable range from 0...10 VDC. The P266ACA-100 is a low cost, through-hole mount design, 24VDC or 115/230 VAC input, pneumatic or electrical 4 wire compact DC Fan Speed Controller.

The Johnson Controls P266ACA-100, Inc. P266ACA100 208-240V Fan Speed Control has an output current of 1.8 amps and voltage input of 208-240 volts. It features a speed control knob and supports 120/240Voltages. It also includes fan motor, power cord, screws and switch terminals. This unit features an adjustable blade position for different models of fans.

This 208-240V 40Amp PLCC/DIP Fan Speed Control is ideal for HVAC, Ventilation and Air Flow Control (VFC) applications. The speed control is equipped with Auto-Ranging Power Transformers, internal frequency adjustment, internal sense resistor, internal multi-set/reset function, internal locking relays and rotating dial switch.

The P266ACA-100 208V-240V fan speed control is a single pole, 3-speed labor saving device designed to regulate the speed and power of a cooling and ventilation fan up to 250HP. This unit consists of: A 3-position, toggle switch for OFF, LOW, and HIGH. Red pilot light. Slide switches for both ON/OFF and HI/LO ranges & 3 intermediate fan speeds as well as ON/OFF switch.

This is a 208-240VAC Fan Speed Control with a high speed wire lead and fixed red terminals. This fan speed control is used with standard sized ceiling fans and operates at 45 watts. It is UL Listed and cUL certified.

The Johnson Controls P266ACA100 is a 208-240V speed fan speed control that is designed with dual temperature controls and comes with terminals that support 16A, 22A and 32A. It includes thermal overload protection and also supports up to two stages for heating and cooling systems. Also it has 24 presets modes which makes it so easy to control and is an industrial grade product with solid styling and high performance.

This P266ACA-100 Fan Speed Control from Johnson Controls is a 208-240 volt single phase speed control for electric fans. It can be used to regulate air flow and temperature in buildings, electrical equipment enclosures and automatic temperature controls. It uses a single potentiometer to set fan motor speed which can be varied between 0 RPM and 100%. It does not include an on/off switch. For use with line voltage fans only.

P266ACA100 is a 100A type, single phase, variable duty speed control. It has built-in overload protection and an adjustable duty cycle as well as 2 contacts for operating auxiliary equipment such as pumps, fans, and conveyors. The adjustable duty cycle allows the output load to be varied from 5% to 100% duty cycle or full on at 100% duty cycle. NEMA 1 enclosure and adjustable meter base with 316 stainless steel cover and 20 ft (6.09m) cord set with plug type: NEMA 5-20P.

A fan speed control is a device used for controlling the intensity of air moving through a ventilation system in order to produce climate comfort in buildings. Fan speed controls are used in the HVAC industry in order to blend large volumes of air with smaller volumes of air within a forced-air system, thus providing optimal operation. This helps to regulate indoor temperature and humidity by increasing or decreasing the amount of outdoor air that is allowed into an interior building space.