Johnson Controls P47AA-1 P47AA1 OP STEAM PRESSURE CONTROL

"0/15# OPEN-HI

"0/15# OPEN-HI. 140# OPEN-HI

"0/15# CYCLE-START/ _ _ _ _ Hi PRES'M.

This steam pressure control is a genuine Johnson Controls product. The gauge range reads from 0-15# steam with a delivery temperature of 175°F. It has been used and is in good condition.

Designed for small steam applications, the Johnson Controls P47AA Series #0-15# Steam Pressure Control is suitable for use with heating boiler feedwater demand plus unload unloading system. Featuring a polypropylene body and an aluminum diaphragm, the P47AA Series #0-15# Steam Pressure Control allows steam to pass through it when set point pressure level is reached. When pressure drops further than set point pressure level, the P47AA Series #0-15# Steam Pressure Control will close preventing flow of steam until pressure increases beyond set point pressure level.

JOHNSON CONTROLS P47AA-1 P47AA1 OP STEAM PRESSURE CONTROL, Horizontal form, Horizontal form, series AA, Voltage 115/230 VAC, Frequency 50/60 Hz, Max. Pressure 100 PSIG/0.7 bar , 30# C 212F, 0.6" C 15mm steam port

The OP STEAM PRESSURE CONTROL allows precise control of steam pressure settings from outside the garment. This new system uses a patented time delay solenoid to automatically maintain a constant steam pressure applied against the surface of the substrate. This steady steam pressure is maintained until all wrinkles are removed... regardless of the actual steaming time used. The OP control can be equipped with internal water sensors to automatically stop and start the heating element thus providing "de-wrinkling" response time of less than one second.

This Pressure Steam Auto-OFF Control is used to control the steam pressure for various steam generator models. It can also be used to turn on or off the heating element of many dishwashers. The pressure steaming has advantages of high efficiency, quick drying and great wrinkle removal.

OPERATION & MAINTENENCE INSTRUCTIONS

The P47AA-1 OP Steam Pressure Steam Press Control from Johnson Controls eliminates the guesswork related to steam pressure. The control offers a simple user interface with a reset function to allow the operator to adjust the steam pressure.

This steam pressure control valve is the perfect replacement for an older worn out part, or as a spare to keep on hand.

Johnson Controls P47AA-1 controller is designed to operate a cycle steam pressure generator or steam boiler. The Johnson Controls P47AA-1 may also be used to control direct fired storage tank water heaters."