Johnson Controls P70EE-1 , Inc. P70EE1 175/425#SPDT,1/4"F,OUTDOOR ENC

"175/425#SPDT

The Johnson Controls 175/425#SPDT,1/4"F,OUTDOOR ENC is a part of the Device type. It has been produced by Johnson Controls P70EE1 , Inc. here in United States. This device is related to other products in the group by the tags: Device.

Johnson Controls P70EE1 175/425#SPDT,1/4"F,OUTDOOR ENC Thermostat. Terminal strip for all common terminal capillary or bus-bar resistances."

The 175/425#SPDT is approved for outdoor use by the UL for use at public assembly occupancies and listed as meeting the Underwriters Laboratories in the USA. It is supplied with a Dura-Drive clutch mechanism and contains a high quality die cast aluminum motor housing that will withstand outdoor conditions.

P70EE-1, Inc. P70EE1 175/425#SPDT,1/4"F,OUTDOOR ENC Valve with Pilot Light and CW55 Teflon Seat. These valves are suitable where the IP68 rating is not required. Used for direct burial and exposed to outdoor rated to -60 F. Adjustable Pilot control and easy load valve stem packing. BunaN "O" ring."

This 175/425#SPDT 18' long, 2 wire, PTC, Normally Open Cord With Outlet 1/4" plug is used with P10EE-1 or P11EE-1 for heat tracing. This cord meets IAPMO and UL requirements for a temperature rating of 175 degrees C continuous duty at 90 degrees C ambient and a voltage rating of 600 VAC RMS between conductors. Its outer jacket is a black PVC insulation . It has stranded copper conductor, PVC inner insulation, and a lead sheath covered with heat shrink over braid shielding. These cords are used primarily for industrial purposes

This 175/425 volt, 1/4 inch hex female threaded, 50 amp SPST (single pole single throw) normally open contact relay is enclosed in an industrial grade NEMA 4X wall mount enclosure. The electro-mechanical contacts are rated for a maximum of 425 amps at 175 volts AC. The thermoplastic, UV resistant enclosure material will not rust, chip or peel. The tamper resistant cover lock prevents unauthorized access to internal components.", "Frame Size: 6"W x 2.25"H x 2"D", "Weight: 1.75 Lbs."

This manual overcurrent device has a NEMA Type 3 enclosure, rated 175A/425VAC at 480Y/277VAC and is used in a variety of industrial, commercial and retail applications. The P70EE1 is UL recognized and CSA certified."