Johnson Controls P74FA-10 , Inc. P74FA10 2-26# 1.5FIXED DIFF CAPILLARY

2-26# 1.5FIXED DIFF CAPILLARY

P74FA-10 , Inc. P74FA10 2-26# 1.5FIXED DIFF CAPILLARY»

The Johnson Controls P74FA-10 is a 2-26# 1.5FIXED DIFF CAPILLARY designed for temperature control, light commercial applications.

The P74FA-10 2-26# 1.5FixedDiff Capillary from Johnson Controls is a miniature device that controls the water flow to a valve. Its Type 5 anodized aluminum body along with its mercury free PVC tubing make it ideal for use anywhere in a sanitary system.

The Model P74FA is an adjustable glass capsule type integral differential pressure gage of the capacitive-resistive combination indicating type, with two ranges and two interchangeable polarizing networks. It is designed for use on windings on all types of transformers.

P74FA Series Fixed Capillary Series regulators are uniquely designed for higher static pressures in the process environment. They are thermally protected to prevent hazards. They are high energy efficient, compact, light weight and easy to install.

The P74FA-10, a thermostatic gear operator, is a water chilled four port capillary operating at a maximum pressure of 4 psi. It can cycle on and off with a 1 to 10 minute time delay depending on the cooling water supply pressure.

The new P74FA-10 represents a new level of performance and cost efficiency for Kohler's 1.5HP, 2-speed ICP product line. This unit offers an extended range of horsepower to more easily manage waste loads such as dewatered biosolids, manure spreaders and wastewater treatment aerators.

Precision liquid manometers for use in liquid and gas pressure and vacuum systems. Turbidity manometers—Polyvinyl alcohol (PVA)-filled tube; refraction manometers — microscope tubes; liquid manometers — two-part liquid, filled with dichromate solution. 0-100 psig, 0-760 mm Hg, 0-60 inHg 25/cs

The P74FA is a multifunction 2P 2V 24VDC planetary gearmotor with a very compact design. These gearmotors have been designed for direct mounting with short shafting for high-unit-count reductions in small or confined spaces. The very small size, when combined with the AX1/SX2 mounting plate, makes this gearmotor well-suited to applications where space is limited.

The Pro-Series pump operates at the same pressure as conventional capillary models, but it can lose up to 2 psi of suction pressure. This results in about twice the spray quantities compared to standard pumps. The Pro Series will handle up to twice the spray material of a standard pump. It will start at pressures as low as 1 psi and continue through 40 psi at the rated nozzle size.

The Johnson Controls P74FA-10 Two Stage Low Pressure Aluminum Steam Traps are designed for mounting in horizontally oriented piping. They are available in both fixed and adjustable designs. The optional flanged cover for this model will complete the package. These two stage steam traps are suitable for steam service up to 10 minutes @ 250 psig, 125 psig minimum continuous rating. An aluminum body has been selected because of its strength properties to withstand the centrifugal forces involved in piping vibration. No other materials have proven to combine corrosion resistance, low maintenance cost, high heat transfer, and mechanical strength to produce a steam trap that will last seven

The Johnson Controls P74FA-10 series centrifugal pump with polypropylene impeller and downstream diffuser is designed to provide quality lubrication for turbochargers.