Johnson Controls R-3710-3007 R-3710 Series Restrictor, T-Fitting with Barbs, 0.007" Orifice, Aqua

"1/4""BARBED TEE .007

R3710 is a 4-Way Barbed Tee. This restrictor can be used with both large and small bore lines. It is also compatible with wire mesh filters with a .007" orifice. This is the industry standard for most residential heating and water heaters. This restrictor is ideal for connecting copper, steel or plastic tubing.

Tee-style restriction part to be installed in a manifold system. 0.007"" O.D. barbed inlet, 0.007"" O.D. barbed outlet, straight male pipe thread by pass to the left with 1/4"" NPT male outlet, fits Johnson Controls R-3710, 1000 Series AquaPurr II AquaKleen II Industrial Dehumidifiers, 60000 BTU Systems."

EARTHQUARTERROCK has worked around the clock to get this awesome brand new Johnson Controls part to you! This item is a genuine Johnson Controls R-3710 Series Restrictor, T-Fitting with Barbs, 0.007" Orifice, Aqua

This restrictor tee is used to provide full flow through the ¾" line and restricted flow through the 5/8""x 1" line. The restrictor Tee is also used to prevent back flow.

R-3710 Series Restrictor, T-Fitting with Barbs, 0.007" Orifice, Aqua

R3710-3007/R3710-3008 Restrictor, T-Fitting with Barbs, Series R3710 fit all JCI shunt type Current Sensors with nominal inlet port diameters .018" (.457 mm) thru .021" (.533 mm). For Encore Systems use when current flow rates are in excess of the limit given in table below."

Restrictor with barb is used to restrict the flow of viscous fluids and maintain a specific pressure or viscosity. Ideally suited for filtration, eductors and venturi's. Standards: ANSI B16.5, ASME B16.5, SAE Standard J1903. Materials: Alloy 22 (SUS304), Monel®, Inconel®, Hastalloy®, Titanium. Barb Size: 0.007"" Pipe Size: 3/8"" Restrictor Orifice Size: 2mm-7mm Pipe Material: Carbon steel, stainless steel, plastic pipe, foam pipe or

The Aqua Torque's electric motor is lubricated for years of trouble free operation. An enclosed split phase induction motor features heavy duty aluminum rotor and shaft sealed ball bearings with spring tensioned bearing caps. Three speeds for light, medium, or high speed applications.

The restrictor has one open port and one ported port for the flow of air. There are barbs on both ports, however, no couplings can be used on either barb. The restrictor is primarily used in two-zone systems where zone two flow is desired to be slowed.

The R3710-30005 Aqua Restrictor places a restriction on the flow of water from a supply outlet to create pressure at a desired point in a pipe or tubing system.