Johnson Controls R-3710-3107 , Inc. R37103107 Restrictors, Aqua 0.007 in. Orifice 1/4 in. x 1/4 in. x 1/8 in. NPT

"RESTR.TEE 1/4x1/4x1/8"".007

RESTR.TEE 1/4x1/4x1/8"".007" is used in combination with regulators, relief valves, and flow controls of liquid cooling systems of certain automobiles. It is used in automotive applications that feature light-duty cooling of certain fluids including fluids used to cool the inside of an automobile.

RESTR.TEE 1/4x1/4x1/8"".007 -- #3107 (R3710-3107), 0.007 INCH ORIFICE 0.007 INCH TEETH ANGLE OTHER CROSS REFERENCE:

Controls Aqua RESTR.TEE 1/4x1/4x1/8"".007 -

Johnson Control's R-3710-3107 restricts the flow of water for an automatic diverter valve to achieve water conservation. It is designed for creating various flow patterns and reducing the flow of water and air pressure. This restrictor has a 1/4 inch x 1/4 inch x 1/8 inch NPT mounting type and passes 0.007 inches of water through at 25 psi. It works with air or water pressures between 20 and 200 psi and can be used in applications such as fountains, humidifiers, irrigation systems, commercial cooling towers, dehumidifiers, fish tanks and ponds, evapor

The Johnson Controls Restrictor (Strainer) (R-3710-3107) is designed to fit in the cooling line of vehicle air conditioning units to restrict flow. It is made of brass and comes with a 1/4" female pipe thread with 1/8" male NPT threads on both openings. This restrictor with 1/4" female pipe thread with 1/8" male NPT threads inlet and outlet is priced in accordance with tubular compression fittings in ANSI B16.11 Pipe Threads, price group 18.00 for use on copper tubing installations through 2000 PSI

A solid body Stem Restrictor designed for use with Stem Entrance Valves. Entrance length is 0.350" and Entrance diameter is 0.250". Body length is 1/4". Entrance fitting is 1/4" NPT female thread. The material used for this restrictor is brass."

The Johnson Controls restrictor tee is a quick connecting, removeable fitting that provides a means of restricting the flow between two passages. This fitting has been designed to be used with chilled water or glycol solutions in an air conditioning system. The unit features all brass construction and is packaged individually in a plastic bag for added convenience.

The R3710, a two-piece Restrictor, is a stainless steel orifice with a 1/4 in NPT male pipe thread. The restrictor is installed between the test hose and bleeder valve of a test stand to restrict the test pressure from damaging or flooding the vacuum pump.

The R-3710-3107 Restrictors, Aqua are proudly made in the USA. It's made of Resin body material and the Restrictor has the ability to work on various types of systems that require a restrictor. The Restrictors, Aqua product dimensions are 4 x 4 x 1.0. This part is a restricted item which does not require a license for purchase. It is governed by the International Traffic in Arms Regulations (ITAR) and the export is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Foreign Assets Control (OFAC).

Fits at bottom of lines of air conditioning and refrigeration equipment. Aluminum, brass, stainless steel, plastic, fluoropolymer, rubber and copper alloys.

The Aqua restrictor is used to regulate the flow of hot water in oil-based heating systems. The restrictor provides optimum pressure drop over a wide range of hot water temperatures. When properly installed, hot water should have minimum disturbance to other system components, retaining the maximum efficiency of the power unit.

­­­­­­­­­This part is a Restrictor. It controls the flow of gas or liquid. It does not have any further functionality. It is not a sensor or an actuator. This part has a manufacturer's warranty of 3 years and its Bromine number is Bromine (II) (Hydrinos) (1:1). Its model number is R37103107.