Johnson Controls T-3610-1002 18 in (46 Cm) Rigid Stem Element for Unit Ventilators

T-STAT For Unit Vent.

The Johnson Controls T-STAT for Unit Ventilators has a 45 degree pleated filter. Its measurements are 18" (46 cm).

The T-STAT 18 in (46 cm) Rigid Stem Element for Unit Ventilators is designed to regulate the temperature of single adjustable tempering valves. The device maintains constant air temperature through conventional room air conditioning systems.

The Johnson Controls T-3610-1002 Stem Element is mechanically mounted with screws, secured to the base box with screws, and electrically connected with solderless connectors. The T-STAT unit ventilator is designed for installation with standard ductwork.

The TSTAT allows air handlers to be controlled from a central location. A typical application would be where sufficient conditioned air is available for distribution from a central point, in a hospital for example. The TSTAT provides a convenient means of controlling a bank of unit ventilators in a group with a thermostat that is in the same space as the return air grilles.

Simply connect your TSTAT to your thermostat and begin saving energy. This energy efficiency control learns the temperatures in your home and programs itself for peak performance.

The TSTAT controls the operation of the VRV system by sensing outdoor temperature and then sending that information to its internal unit controller.

The Johnson Controls T-3610-1002 is an 18 inch long rigid stem Thermostat Element. It is used for air conditioning and ventilation equipment.

The Stat is universal and will work in any brand stoker. It comes with a 5 wire pig tail so it will connect to most control boards without the need of additional wire nuts or connectors. The terminal block is heavy duty and rated for over 30 amps and over 300 volts.

Since 1951, Johnson Controls has strived for excellence in design and innovation of the products they manufacture. Now, when you need reliable, high quality HVAC parts, search no further than Johnson Controls/Spencer Technologies to provide you with the best in the industry.

Functional, dependable residential air conditioners which use heat pipes to deliver more efficient, reliable performance. These units are considered both wall mounted and floor mount.

Form-fit strain relief for wire gage .05 to .18 in. (1.3 to 4.6 mm) and wire insulation OD of .85 to 1.31 in. (21 to 33 mm) Unique, bend radius compensating rigid stem design ensuring optimum thermal control and long service life Room temperature thermistor for very low voltage drop Unexpected open circuit resistant Not subject to syneresis or creeping resistance range: Basic: 5 to 35 Ohms Titanium: 30 to 300 Ohms

Eliminate cause of discomfort by reducing temperatures in room.