Johnson Controls M9220-BGA-3 24V S/R 2pos ACTR 177inlb 24V S/R 2pos ACTR 177inlb

24V S/R 2pos ACTR 177inlb

A Johnson Control 24V S/R 2pos ACTR 177inlb Micro Motion Actuator with Adjustable Travel, 316 Stainless Steel Housing

The M9220-BGA-3 24V S/R 2pos ACTR 177inlb was designed with a combination of technologies that deliver maximum performance. It is aesthetically pleasing and easy to install. This product allows you to create the comfort environment you desire.

Easily programmable and simple to maintain, Johnson Controls' M9220-BGA-3 24V S/R 2pos ACTR 177inlb Monitor Controller provides constant voltage control of string-reversing inverters. It's designed for switching controllers operating at 28.8 to 57vDC.

The Johnson Controls M9220-BGA-3 24V S/R 2pos ACTR 177inlb (Johnson Controls P/N 8904) is suitable for a range of applications including booster seats, scooters and power chairs. This pull-to-release actuator ensures that the system is easy to pull start even after it has been left inactive for a period of time. Rotational adjustment ensures additional flexibility in design.

This Johnson Controls Spring Return Actuator (24V S/R 2pos ACTR 177inlb) adds a new, efficient level of control to Johnson Controls' line of paddleball-style actuators. This 24V double-throw relief valve is commonly used for applications in the electrical, oil and gas production industries.

The Johnson Controls M9220-BGA-3 wiring harness is a integral component in the wiring of all Johnson Controls commercial HVACR (Heating, Ventilation and Air Conditioning) products. It delivers 24V S/R 2-position air conditioning/cooling Actuator Rod output via 177inlb wire.

In a Johnson Controls 24V ac/dc motor starter actuation relay (177 in-lbs), your application demands the best. Our new, high power, low energy consumption NEMA 4 enclosure with handle is ideal for marine applications where the temperature can reach -25C to 85C (-13F and 185F). It has IP 68 (NEMA 12) waterproofness rating for submersion in up to 15 m of water when closed. The coil terminal is factory pre-wired for leads to 11 mm side lug (or to solder directly onto terminal).