Johnson Controls T-4002-122 Terminal Connector with Two Straight Fittings for Plug-In Connection

2PIPE MTG STR FITTINGS

Terminal Fittings (T4002-122) Terminal fittings are designed for use with many of our industrial temp, pressure, and process applications. They crimp onto Schrader valve stems on industrial pressure gauges 0 - 250 psi (0 - 17 bar). Maximum industrial gauge pressure is 500 psi (34 bar). The industrial/process (IPC) valve connector Series T4002 provides reliable connections for industrial temperature, pressure, and process applications. Made in the USA

This straight terminal connector is for use with the T4002 series control stations. It has two straight brass fittings and can be used to connect to 2 cables.

The T-4002-122 terminal connector with two straight fittings for plug-in connection is designed to mount onto the existing terminal strip or subpanel. The unit has two 4-position terminals and can accept up to six connections at 250V 10A maximum per terminal.

Connect our Terminal Connector with Two Straight Fittings for Plug-In Connection to a generator and you'll have the power for your indoor and outdoor appliances. The T-4002 provides up to 12,000 watts of backup power at 120/240VAC.

The T-4002-122 Terminal Connector with Two Straight Fittings for Plug-In Connection is perfect for easy, secure wiring of your Weathermatic systems. It conveniently allows you to connect two separate cables together to form one larger cable run. The terminal connector is easy to use and installs quickly.

This Johnson Controls T-4002-122 terminal connector with two straight fittings is designed for plug-in connection and is ideal for building alarm systems.

When installing the T-4002, it is important to use the straight fitting and cap provided. This fitting will be installed on the pipe above the transformer and maintained by the terminal connector using a bracket. A second straight fitting and cap must also be installed on the pipe below the transformer for this installation to work properly.

The T-4002-122 is a terminal connector with two straight fittings for plug-in connection. It is used when plugged into an inverter when powering from a permanent power source. The terminal fittings are insulated and must be electrically isolated from the vehicle wiring harness in order to prevent accidental ground contact.

A Terminal Connector is a device with two, three or four connectors mounted in a housing. Terminal connectors allow for the connection of two insulated conductors (wire) to each other or to a metallic equipment. Both single and multi contact designs are available offering up to six contacts in some cases. The terminal connector is installed between the conductor and its support.

The T-4002 socket, with its socket and plug design, provides a connection for 120- and 208-volt and 277- and 480-volt straight material connecting plugs.

The T-4002 terminal is a permanent solution that can be used to fasten and join combustible and non-combustible materials, such as gypsum board, wood framing and wall coverings. It can also be used for an array of other applications such as dust collection points, wire runs, flue pipes, etc. The terminal can be mounted directly to the building structure using screws or mounting plates.

This straight fitting is used in a sensing line. It must be connected to a T-4002 series connector by a reducing bushing or a straight connection.