Johnson Controls T-5210-1004 Pneumatic Temperature Transmitter, Direct Acting, 40-240 Degree F

DUCT TEMP TRANSMITTER 40-240F

The Johnson Controls T-5210-1004 Direct Acting Direct Reading Pneumatic Temperature Transmitter has a range of 40 to 240 degrees Fahrenheit. The transmitter has a resolution of one degree Fahrenheit.

This temperature transmitter is used to monitor temperature in ducts. It can be used in heating & cooling, plumbing & plumbing supply, HVAC equipment, and refrigeration systems. The standardized thermocouple leads come with factory installed push terminals for quick and easy wire connection.

A direct acting, 40-240°F (4.4-72.4°C) dial thermometer transmitter produces a 0-10VDC output proportional to the difference between its case temperature and sensor temperature, with an accuracy of ±1.2% of reading over the measuring range ±0.8°F (0.5°C) nonlinearity within ±7% of the nominal output voltage

Provides remote indication of air temperature up to 240F. A 'straight' design, it is designed for use with B-D NTK and ST with adjustable T-Type thermocouples in low pressure/low capacity systems with inlet and outlet temperatures at ambient air. Twist mount and thread adapter available with additional charge.

Pneumatic temperature transmitter used to measure air flow stream temperature for pneumatic transmission systems. The transmitter generates an output signal directly proportional to air flow stream temperature. The packaged transmitter is Instantly interchangeable within the industry standard SAE/ISA mounting, making it easy to switch with existing transmitters or accessories.

The Johnson Controls T-5210-1004 pneumatic temperature transmitter provides a direct hard wired connection to the RTD without the hassle of cable pulls. Includes PVDF cable and connectors for fast easy installation and change out. Features: - Ea

The T-5210-1004 is a deep well transmitter for use in conjunction with the TJI-100 control unit. Placed in the return air duct, this direct acting transmitter can sense temperatures from deep within the air stream. The transmitter is hermetically sealed to prevent intrusion of dust or dirt particles while permitting passage of air. Since this transmitter does not require an external signal power, installation is simplified while reducing unnecessary wiring.

The PT100 Temperature Transmitter type K utilizes the same rugged thermal mass and dependable sensing element as the original PT100. This sensor is designed for use in precision air handling air temperature applications. Proven technology provides improved performance, greater accuracy, easy installation and cost effectiveness. For more detailed information on the single element transmitter line of products, please see our brochure JoConTran (Pt100).

The T-5210-1004 range of pneumatic thermal transmitters uses a built-in floating bimetal sensing element and simple analog circuitry to provide reliable and repeatable measurement.

The 52XX series conductivity sensor transmitters are ideal for monitoring the temperature of liquids or gases, process plants, heating & cooling systems, etc.

Designed to convert 0-3 VDC to 4-20 mA.