Johnson Controls 9202 Pneumatic Temperature Indicators, range 40 to 240°F (6 to 114°C)

"40/240F 3.5""PneuTempIndicator"

The Johnson Controls 9202 Pneumatic Temperature Indicators are a perfect choice for use in laboratories and manufacturing environments where it's vital to maintain accurate temperature monitoring throughout the facility. These indicators offer an easy-to-read display, with a range of 40 to 240°F (6 to 114°C), and they're compact enough that they can work in tight spaces. The pneumatic temperature indicators are made with a wide face mount and are simple to install, making them a great choice for many industrial, manufacturing, and laboratory environments.

The Johnson Controls 9202 Pneumatic Temperature Indicator offers a fast, accurate and reliable way to measure temperature when used with a Johnson Controls transmitter or receiver. The gauge is constructed of impact-resistant polycarbonate and features a stainless steel stem. The 0-400 range (6-116 psi) is marked in increments of 10 from 40 to 100 (6 to 37 psi), with each increment in the 200 to 400 range (114 to 248 psi) being 1.

Johnson Controls 9202 Pneumatic Temperature Indicators are for use in Johnson Controls’ 400 Series Pneumatic Thermostats. They are used in space conditioning and process control systems to monitor air temperature and actuate a control system when the air reaches an alarm limit.

Johnson Controls 9202 Pneumatic Temperature Indicators display temperatures in a shop environment and indicate out of range conditions. The indicators are easily installed using the pre-punched mounting holes and can be adjusted at any time using a 5/16"" hex wrench. The indicator is manufactured from UV stabilized polycarbonate with a temperature range of 40 to 240°F (6 to 114°C).

The Johnson Controls 9202 Pneumatic Temperature Indicator is ideal for applications where a visual indication of temperature is required. These devices are used to monitor heaters, coolers, or heat exchangers. The unique design of the Pneumatic Temperature Indicator allows it to maintain contact with the process stream at all times and not subject to wear or vibration, which can occur with other types of temperature indicators. The 24"" stem has a 6"" extension which allows greater freedom of movement through the piping system.

Johnson Controls 9202 Pneumatic Temperature Indicators are direct reading instruments used to measure the temperature of a gas at pressures up to 100 PSI.

Help ensure system accuracy and maximize energy savings with Johnson Controls 9202 Pneumatic Temperature Indicators. The 3.5""PneuTempIndicator (9202) is used to display the temperature in heating and air conditioning applications with a 40°F to 240°F range. Use it on indoor or outdoor piping, equipment, or ducts.

Pneumatic temperature indicators with a 1/4"" stem and 3.5"" capillary tube which is ideal for use in pipe work, ductwork, air conditioning units and heating systems. The indicator will reach a full range (40 to 240°F / 6 to 114°C) in minutes when placed in water or glycol solutions at room temperature. It is also suitable for low-pressure applications at up to 5 psi.

40/240F 3.

Johnson Controls 9202 Series Pneumatic Temperature Indicators feature 3.5" (89 mm) tall red/blue anodized aluminum enclosures with a clear plastic face that has easy-to-read black and white markings. Each indicator is equipped with a small, silver-colored plastic knob for temperature adjustment and features a large, easy-to-read (up to 50% larger than most competitors’ indicators) red and blue scale. The temperature range is 40 to 240°F (6 to 114°C).