Johnson Controls TE-6001-3 Packing Nut and Fittings for Use with Wz-1000 Wells In Immersion Well Applications

"PACKING

PACKING NUT AND FITTINGS FOR USE WITH WZ-1000 WELLS IN IMMERSION WELL APPLICATIONS

A. TE-6001-3 Packing Nut

Replace packing in Immersion Well Wells with the Packing Nut and fittings for use with WZ-1000 or WZ-2000 wells. Contains 1 packing nut, 2 packer set screws (1 & 1/4''), 1 adjuster cap, 6 poly cap 10''', 6 poly cap 6''', 6 thread sealant, 6 adapter nuts, 6 lock washers, 6 short spacers, 12 long spacers

This 8'l" (2.4m) U-shaped packing nut and fittings set is the replacement packings for use on Wells infrared heaters."

This kit is intended for use with three wells and is supplied with 3 TE-62 packing nuts, 3 TE-63 packing nuts, and 2 TE-64-IT1 liners. Packings TE-62 and TE-63 can be used in high temperature wells such as steam and hot oil wells. Flammable, explosive or otherwise dangerous gases or vapors shall not be permitted in well unless the packings are installed in all caps and packings conform to conditions of API Specification 5D and meet the following test: The base contact for P/N: TE-62 and TE-63 shall not be

JOHNSON CONTROLS TE-6001-3 Packing Nut and Fittings for Use with WZ-1000 Wells In Immersion Well Applications. Package Quantity: 1

The TE-6001-3 packing nut and fittings are designed for use with the Johnson Controls Wellz-1000 Wells that are tubing in operating conditions. These packing nuts and fittings are a consumable item, which should be replaced at a frequency based on pump size and well depth. The recommended replacement times are listed below."

An inexpensive replacement packing nut for use in controlling the seal in low-pressure wells. This packing nut can also be used when pumping wells without plugs to provide a positive seal at floor level. The kit includes one PN-1000 packing nut, three 3/16"-24 x 5/16" socket head cap screws, three 3/16"-24 plain washers, and nine 3/16"-24 flat washers.

The TE-6001-3 Packing Nut and Fittings for Use with Wz-1000 Wells in Immersion Well Applications is for use with Johnson Controls' WZ-1000 well casing materials. When the space between the well casing and the surrounding material gets smaller, sealing becomes more important. These components are designed to help. They allow for precision manufacturing of wells to exacting specifications.

The TE-6001-3 is a Locking Packing Nut and Fittings for use with Wz-1000 Wells in Immersion Well Applications. The rugged steel packing nut features flanged design to prevent shifting, and flange contact area allows for easy sealant spreading. The flexible sealing bar provides an efficient multipoint seal between the pipe flange and packing nut. This non-hardening material allows easy removal of the sealant for pipe replacement or rework. The locking washer firmly holds the nut against the well casing. Package quantity is 10 per package, Fittings are available separately (model number

NUT AND FITTINGS for use with WZ-1000 Wells in Immersion Well Applications

The TE Series Thermowell is designed to be installed in ACI AC-152 wells for use with wet bulb and oilfield thermometers, as well as the Johnson Controls Max-3000 Series Conductivity Meter. The TE is a welded body construction with a packed metal seat and a Stainless Steel 304 internal bore.