Johnson Controls TE-631GM-1 "DuctMtTempSensor 4"" 1k Nickle"

"DuctMtTempSensor 4"" 1k Nickle"

The TE-631GM-1 "DuctMtTempSensor 4"" 1k Nickle" is a Johnson Controls Temperature Sensor, Fan & Equipment Monitors

The Johnson Controls TE-631GM-1 "DuctMtTempSensor 4"" 1k Nickle" allows you to keep your temperature on point with the integrated temperature sensor.

The DuctMtTempSensor is an indoor air quality sensor used to monitor temperature in residential heating and cooling systems. The DuctMtTempSensor is designed to work with the UniPro protocol.

Easily install this 6" - 6" mounted air temperature sensor inside any HVAC duct for temperatures accurate to +/-1F. Commercial-grade probe is made of nickel-plated brass for reliable operation in all indoor environments. Teflon insulation eliminates wire stress breakage, and coated stranded wire allows higher operating temperatures. The sensor includes an adhesive backplate, an 18 gauge leadwire, and a thermistor with built-in pre-wired connector. When combined with the DuctMt1 Controller (sold separately), this sensor can be used to trigger a building heating or cooling system to turn on or

The TE-631GM-1 is a 4"" Nickel thermistor that can be used for measuring air temperature for various installations.

This sensor is designed to read air temperature in indoor air ducts. Its small size and 4 inches mounting height makes installation under drop ceiling systems simple with no need for cutting of sheet metal or false ceiling panels. This sensor is designed for use with the Thermostat D-Series only.

This economical controller/temperature sensor is easy to operate and install. Permanently mount it in a programmable CHIMERIX thermostat or DRIVER MT to monitor attic temperatures and automatically maintain desired room temperature or other remote sensing area, such as a basement or garage.

The TE-631GM-1 precision temperature sensor with quick connect is designed to connect to a Johnson Control® pH controller for physical and chemical buffering of the air and/or water in a ducted HVAC system. The temperature sensor comes with a wire lead harness that plugs into the pH Controller® and the temperature sensor mounts in place on the temperature controller housing via quick connect fittings.

The TE61GM1 is a thermistor with heat-monitoring function. This part has an operating range of -40 to 185 degrees Fahrenheit (-40 to 85 degrees Celsius) and expect accuracy of +/- 2.5 +/- 0.3 degrees C. It is constructed using Nickel, with a length of 4", and includes soldering lugs.

Mounts easily with double sided tape, screws or zip ties. Will not attach to fan operating in reverse.

Johnson Controls TE-631GM-1

When it comes to your heating and cooling system, do you know what's happening in your home? Keep your family comfortable with the Johnson Controls Remote Access temperature monitoring system. Access temperature levels from anywhere, anytime. Change temperatures remotely with the mobile app when you're on vacation. Get notified when temperatures are too high or low, when filters need replacing, or when anything goes wrong.