Johnson Controls V246GR1-001C Water Regulating Valve, 2 Way, Flange

1.5"flg Hi#WtRegVlv200-400#DA

The Johnson Controls V246GR1-001C water regulating valve is a 2 way, 1.5 inch flange with a Hi/Wt regulating assembly. This product is a direct replacement for a March brand water regulating valve. This product is a reliable and efficient choice for a variety of residential and commercial applications where balancing incoming and outgoing hot or cold water flow rates is required. The Johnson Controls V246GR1-001C water regulating valve has been constructed from durable materials to ensure it will stand up against everyday use as well as maintain freezing temperatures as low as -40 degrees Fahrenheit without damage.

The V246GR1-001C from Johnson Controls is a water regulating valve, 2 way. This product supports the following Australian plumbing codes: AS3660, AS4024 and AS1668. This product has a flow range of 200-400gpm and head pressure of 20-150psi and includes a flange.

The Johnson Controls V246GR1-001C Water Regulating Valve, 2 Way, Flange is for use on most Johnson Controls Boiler Models.

The Johnson Controls V246GR1-001C Water Regulating Valve, 2 Way, Flange provides an exact volume of water with each use.

The Johnson Controls C246TRHF single-port 2-way valve with an integrated 1/2" male NPT pipe thread connection is intended for the control of water flow in commercial, institutional and industrial applications. The flow capacity of the C246TRHF is 200 to 400 gpm at 20 to 30 psi.

Johnson Controls' V246GR1-001C water regulating valve is appropriate for residential, commercial, and light industrial applications. This 2-way valve is plumbed between the water supply piping and the heating equipment. It maintains a consistent temperature in the heating coils regardless of fluctuations in either the hot or cold water supply.

The Johnson Controls V246GR1-001C is a 2 way water regulating valve that was designed to shut off the flow of liquid causing low flow and long cycle times while providing high flow and short cycle times while providing high pump performance. Its integrated sensing feature allows the valve to work with specific models of pump and solenoid coil and can be used for both hot and cold water applications. Use the Johnson Controls V246GR1-001C on shower valves, dishwasher valves, washing machine valves, and faucets.

The water regulating control valve is designed to control the flow through the system. This valve features cast bronze body and stainless steel bonnet with holding twoparts. It's compatible for both heating and cooling systems.

A two-way, pressure regulated valve for backwater prevention. The V246 Series has a secondary service loop to prevent tank depletion during periods of non use.

The V246GR1-001C water regulating valve is a 2 way valve designed for use in hydronic heating and cooling systems such as radiant floor heating and forced air systems. This valve allows the user to connect either copper or PEX tubing or both tubing types at the same time or isolated from each other. The unique spring ported spool provides 125 psi [9 MPa] relief and the solenoid coil is nested for high reliability and long service life.

Designed for water use only; NOT to be used with air conditioner refrigerant. Accommodates 1/2" MNPT connection.

Johnson Controls produces HVACR product solutions. They work with original equipment manufacturers (OEM's) to design, build and market Johnson Controls-branded products under exclusive license.