Johnson Controls VG7000-1002 1/2 & 3/4 SPRING KIT V3000-8 4-8

1/2&3/4 SPRING KIT V3000-8 4-8

Johnson Controls VG7000-1002 1/2&3/4 SPRING KIT V3000-8 4-8. This spacer can be used on motion devices that use a NEMA T87 SSR, such as the Vigilant TN98, or these Johnson Controls motion devices: HCP200, HCP200-221, and HCP200SC.

Johnson Controls VG7000-1002 1/2 & 3/4 SPRING KIT V3000-8 4-8 Golf Cart Loader.

Johnson Controls VG7000-1002 1/2 & 3/4 SPRING KIT V3000-8 4-8.

The VG7000-1002 is a complete Spring Kit for the Johnson Controls V3000 & VLP product line.

For increased convenience, call one of our technicians to install springs on your old motor - for free.

In most applications, the Air Force end of the coil is threaded and the piston end is not. The Coil Spring Kit comes with a pre-installed compression spring with a 900 lb. load and a 187 lb. For example, if the spring measures 1.5" free length, I would need a 2 3/4 spring.

The VG7000-1002 is a Call for Quote part in Johnson Controls's Building Efficiency Division.

The AUTO-HOLD option allows you to lock the valve in the "ON" position for continuous water flow, or "OFF" for manual operation.

Johnson Controls.

If the elevator has a tendency to bounce at sudden stops, then it will be even worse for your employees, residents or patients. This replacement kit comes with a specially designed shock absorber that equally distributes sudden shock to reduce jumping and bouncing. It also serves as a safety feature for minimizing the possibility of falls down the shaft.

Johnson Controls Climate Control products are often very large installations that can exceed 400,000 BTUs, support hundreds of motors and include hundreds of components. Because the products are so complex to test, it would be impractical to perform lab tests on all product conductors to determine their life expectancy under typical customer use conditions.