Johnson Controls VG7241LT+72CHGC "3/4"" N/O 4.6Cv 24V 0-10VDC 2SW"

"3/4"" N/O 4.6Cv 24V 0-10VDC 2SW"

Our Johnson Controls VG7241LT+72CHGC "3/4"" N/O 4.6Cv 24V 0-10VDC 2SW" is a great choice for HVAC applications, commercial equipment, and data communication. We have been on the leading edge of design and quality for over a century. And each product that bears our name represents a pledge of our dedication to lasting customer satisfaction.

Why should I replace my backup battery with a lithium battery?
Johnson Controls VG7241LT+72CHGC "3/4"" N/O 4.6Cv 24V 0-10VDC 2SW" is the perfect choice if you ask yourself this question. It is reliable, affordable and durable.

The Johnson Controls VG7241LT+72CHGC "3/4"" N/O 4.6Cv 24V 0-10VDC 2SW" is a solid-state contactor for high voltage and medium current applications such as air conditioners, refrigeration compressors, and other heavy duty loads. It features reliable solid-state switching to help control motor loads through connections including power cords, relays, transformers, solenoids, and transistors. Its all cast aluminum housing provides maximum heat dissipation for enhanced durability in demanding applications.

The VG7241LT+72CHGC is an auxiliary contact device used to convert standard 4-wire DC to 2-wire DC DC Volts. The N/O 4.6Cv 24V 0-10VDC 2SW converts 3/4"" to 0-10VDC, 0-10VDC 4-Wire to 2-Wire, and 0-10VDC 3/4"" N/O dry contact closure.

The VG7241LT+72CHGC is a 2-state nonvolatile on-off actuator with a double-pole normally open output. When the input is in the on state, the device outputs a 24V ac signal of 4.6Cv. The sensor is designed to signal door strikes and garage doors, and has a 0-10VDC control circuit.

The VG7241LT+72CHGC is a self-contained indicating miniature Quad relay with a high voltage contact of 24V AC/DC, a nominal contact capacity of 4.6Amp and a nominal coil resistance of 28Ohm at a nominal voltage of 30VDC. Featuring four windings to give diagnostic indication, this rugged relay features a rugged plastic sealed case available in both normally open and normally closed design for positive or negative switching.

24V DC N/C Relay, With Normally Open (N/O) contacts, 8A @ 24VDC, 10A @ 24VDC, 24 VAC/DC SPDT Relay. Digitally controlled, voltage actuated spdt relay.

The VG7241 has a wide range of direct and inverse proportional outputs. The 4.6 CV output voltage is selectable from 0-10V, 0-5V, 0-15V, 0-20mV, 0-5mV and 0-3mV. Contact function ranges from 2 to 24. The 24 CHGC contactors can be either 24V single coil or 24V triple coil with an automatic tripping mechanism for over current and short circuit protection and can be used individually or in combination (i.e: 0/2 ON).

Output terminals are designed with a standard terminal housing that allows for connection to standard field wiring or switchcraft wire connectors ends. Also features a voltage range of 0-10 Volts dc with a current rating of 4.6 Amps.

This series produces a fully proportional control output of 4 - 20 mA or 0 – 10 VDC. The output is referenced to N/C (normally closed) contacts that will open when an electrical input signal is applied and reset to closed (or off) when no input signal is present.

The VG72 Series transmitters are high quality industrial transmitters designed for use in industrial control systems, industrial electronics, industrial automation, industrial networks, industrial PLCs, industrial HMI panels, industrial human-machine interfaces, industrial SCADA systems, industrial Ethernet based control systems and building automation applications.

Flow meters are used to measure the quantity of gases, liquids, heat, airflow, chemicals, fuel oils, smoke, steam, vapor and water. They are built to withstand harsh environments with electrical motors ranging from 36VDC to 480VAC.