Johnson Controls VG7443CT+423GGC "1/2"" 2W .73Cv 24V PROP S/R AUX"

"1/2"" 2W .73Cv 24V PROP S/R AUX"

This "1/2"" 2W .73Cv 24V PROP S/R AUX" is a Johnson Controls Thermostat Heating & Cooling Fan Control. It is used for applications such as HVAC and refrigeration. The part number for this item is VG7443CT+423GGC. It was manufactured in United States.

High quality, low cost 24V PROPELLER INDUCTION MOTOR. This rugged, cast aluminum motor incorporates permanently lubricated ball bearings for low maintenance, high efficiency operation with longer motor life. Cast aluminum shaft with bushings for minimum coolant circulation loss. For use with 24V DC or AC drive systems. Maximum speed is 1725 RPM at 175 VDC or 1750 RPM at 200 VAC depending on the voltage range of the drive system. Standard .73 cubic feet per minute (SCFM) free air flow is excellent for most propeller applications including eductors, blowers, centrifugal fans

Maximize your lighting control potential with the VG7443CT+423GGC Prewired HMI Ballast that allows you to power up to three 400W lamps. Designed for 24V operation, it has an output of 4.73Cv.

NC & NY UL approved! Perfect for OEM replacement or new construction! The Johnson Controls VG7443CT+423GGC 1/2" 1000 - 2000 watt 2 pole 240 Volt PROPANE gas valve with Modulating pilot is designed for use with natural, liquefied petroleum gas or propane fuels. A rapid heat response and turn on/off time provides efficient heating, even in an open combustion flame.

The VG7443CT+423GGC provides the power output of four 24-volt DC low voltage EFUs, in an easy-to-install plumbing package. It also includes two transformers, one water-start module, and two 36" leads on coils for installation on the roof.

There was two tins of grease; one 25 watts, the other 50 watts.

Providing indoor comfort is an important part of your job. The VG745CV+423GGC package gives you that capability with a deluxe package that includes the 24V Johnson Controls non-programmable heating, ventilation, and air conditioning (HVAC) system with fixed speed fans, filters, and humidifier. This package also includes the 1/2 HP Johnson Controls Series 24 VDC variable speed reversible motor for motorized dampers with auxiliary pushbutton switch.

You can rely on us for all of your automation needs! At Johnson Controls, we design and manufacture building control, HVAC, automotive interior systems, power solutions, security solutions, and electronic components world-wide.

The Johnson Controls VG7443CT+423GGC is a 24 VDC 3-wire system, central processor unit with one 0 to 100% fan speed control. The round stainless steel chassis provides for optimum heat distribution, which helps keep the temperature constant and prevents damage due to interrupted airflow. It includes a 4-pin power jack and a 5 m (16 ft.) insulated harness with 250 mm (10in.) quick connect terminals.

Directly connected to the grid, inverter with leads, air conditioner

Contractor Grade Weatherproof Rocker Switches

Whether you have a refrigerator, a freezer, a portable device or any other type of electrical equipment with a cooling system, the right freon gas is crucial. The precise mixture of gases that comprise the freon is important, as it affects efficiency and performance. In addition to these factors, correct installation and maintenance are essential to ensuring that your cooling system continues to work optimally.