Johnson Controls VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED"

"2"" 2W 46.2Cv 4-8# ENCLOSED"

The VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED" is a 120-Volt thermostat designed for water and space heating. It is NEMA 4 rated and Class A/B, Zone 7 rated. The product allows for two stage heating and also includes an R suffix on the model number on the ID plate on the unit.

The Johnson Controls VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED" is the best single stage gas furnace for heating parts of your home. With an EER of 10.0, this unit uses 340 less watts of energy than the closest comparable model on the market, which leads to dramatic savings for you, less installation time and money for the contractor, and no additional power source for installation.

The Johnson Controls VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED" Two Wire Low Voltage Thermostat Combination gives off a Class B insulation and belongs to the temperature and movement class temperature and movement.

Powered by a 27 kW inverter and a 46.2 Cv DC motor, the VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED" from Johnson Controls can operate up to 300 amps at 208/240V. The unit has a motor run capacitor rated for 10k hrs motor run operation. The Inverter motor has an efficiency rating of 83% while operating in 120 volt circuit. This motor uses a combined current of 16 amps while running in 240 volts circuit.

The Johnson Controls VG7481ST+3003D "2"" 2W 46.2Cv 4-8# ENCLOSED", is the perfect heating and cooling solution for a residential home. This product is a heat pump that can heat or cool a small to medium sized house. The product has been ENERGY STAR Qualified, which means it meets specific guidelines for energy efficiency.

Johnson Controls 2"" 2W 46.2Cv 4-8# ENCLOSED

Built to last more than 20 years, this Johnson Controls VG7481ST+3003D ENCLOSED VENTED GAS PACKAGE UNIT has a multi-speed indoor blower designed to be quieter, smoother and more powerful. Its push-to-connect fittings allow for easy installation. As an ENCLOSED VENTED GAS PACKAGE UNIT, it includes a "2W 46.2Cv 4-8#" ventilator motor coil, which is balanced with its enclosure to maintain efficiency. With a stainless steel coil cover, this ENCLOSED VENTED GAS

Our Johnson Controls VG7481ST+3003D is a fully packaged steam generator reducing installation and operating costs. Features include a stainless steel boiler, electronic expansion valve, condensate pump, pressure relief valves, and barometric relief valve with alarm. Additional features include a crescent wrench-free steam connection, a wide case opening for easy access, and an easy-access ground fault interrupter circuit interrupter.

When space is limited, the simplicity of an enclosed unit can be an answer. These compact versions of our top-load, high-velocity blower fans are ideal for applications where height is critical. Available in both single and three phase versions or conveyorized, all models include reliable Johnson Controls® components and backed by the company's commitment to quality.

Automatic Transfer Switches (ATS) range in capacity from 1 to 100 kVA and can be installed in zero-U or NEMA enclosure. They include a built-in fused disconnect switch with 100 amp disconnect, an enclosed gas solenoid operated circuit breaker and dual voltage terminals. The ATS also includes a 9 pin connector for add on communication modules such as power quality loggers and HART communicators, which provide added system diagnostic capabilities based on 1 kHz power quality signals for primary connection protection

The Johnson Controls VG7481ST+3003D is a 240V commercial water heater is suitable for homes with 2 bathrooms. This model has a maximum flow rate of 6.0 GPM. Though it is ENERGY STAR qualified, it is not suitable for mobile or manufactured homes. This model has an energy efficiency rating of 78 per year which means that it is predicted to use 78% less energy than standard models.

There are two main types of commutators: single-flux and multiple-flux. Multiple-flux, since it consists of a large number of pivot points, is always subjected to serious wear and tear. In order to reduce the number of pivot points, Johnson Controls have introduced a new commutator design – the single-flux. It consists of a large, central high-current switching component with specifically designed plates around it. The advantages of the single-flux design include reduced need for maintenance and improved commutation efficiency at high currents