Johnson Controls WHA-P399-200 6.6ft WiringHarness for P399

6.6ft WiringHarness for P399

Keep your equipment within reach and safely protected with Wha-P399-200 6.6ft WiringHarness for P399. This wire connects the portable PA to the speaker stand and allows you to adjust volume and control different settings without leaving the stage.

The WHA-P399-200 6.6ft WiringHarness for P399 is specially designed to suit the needs of the outdoor power equipment industry.

The Johnson Controls WHA-P399-200 6.6ft WiringHarness for P399 fits into the wire harnesses that are part of the Johnson Controls modular wiring system. It is 6.6 feet long with 2 circuits, each containing 4 wires. Each circuit is protected by a 15Amp time delay fuse. The WHA-P399-200 6.6ft WiringHarness for P399 has AWG18/2/C/SJT jacketed wires with stranded tinned copper conductors and terminals in terminal blocks, each rated at 16A - 240V 50/60

This 6.6ft long harness is designed for P399 series Valves, Integral Type TRT Series, Series DPV-06/116-116VAC.

Wiring harness for P399. This is a HVAC Contractor "drop ship" item and will be despatched separately from the rest of your order.

The 21-foot wiring harness features a standard female Quick Connect receptacle and a standard male Quick Connect plug, and is compatible with the P399. All of our wiring harnesses are designed for indoor installation only and require the purchase of a climate control unit for outdoor/mobile applications

This harness will allow you to add a second compressor to your P399 Air Cylinder. It contains the wiring plus the plug end that connects to the compressor.

5-Wire pigtail harness used to connect the Johnson Controls WHA-P399-200 outdoor wireless zone transmitter to three zone valves when installing zone valve receivers in close proximity of each other.

Wiring harness is used with the Johnson Controls Half DIN Series P400, P600, P800 and B700 series monitoring stations. It reduces installation time and cost, while increasing ease of use by providing clear labeling of industry-standard circuit components.

The plug-in wiring harness is designed to work with select Johnson Controls sliding patio door operators.

If you want to install a cover, Just splice it in and secure with heat shrink tubing.