Johnson Controls Y65F42-0 277/480V-24V 40VA MULTI MT 277/480V-24V 40VA MULTI MT

277/480V-24V 40VA MULTI MT

This kit includes one 277/480V-24V 40VA MULTI MT, one 277.5kA@480Y/277V panelboard, one 277/480V-24V 40VA MULTI MT with circuit breaker, one 50M00-10 CT smart CT , two 277/480V-24V 40VA MULTI MT circuit breaker .

Johnson Controls 277/480V-24V 40VA MULTI MT

The 277/480V-24V 40VA MULTI MT is a Johnson Controls Power Module for use with V Series Run Capacitor, NEMA 4X/IP66, 277/480V-24V, 2P, 0.4VA, 20% Duty Cycle.

This 277/480V-24V 40VA MULTI MT Johnson Controls Y65F42-0 semi-enclosed blower air stream, 40VA maximum.

The Y65F42 is a 277/480V-24V 40VA MULTI MT solid state relay that has two independent output contacts. The modular system includes protected control circuitry that features fixed rated operation rated for indoor or outdoor use, Lightweight alloy enclosure for added durability, Quaility components are used to provide long term reliable operation, Multi taps are standard on all models which include RS485 serial port capability

The Y65F42-0 277/480V-24V 40VA MULTI MT provides power and control for up to three HP motor loads and is ideal for residential, light industrial and commercial applications. The relay contacts of the relay operate normally closed and coil voltage is 24 VAC. The power contactor operates outside of the relay coil supply voltage and indoor ambient temperature ranges. This module replaces the following: Actuator 3C247A, FANUC A56B-0381, Kollmorgen 912016, Siemens 5SEG1131-0AA41S

Lightning-fast, secure data acquisition. With the Johnson Controls Y65F42-0 277/480V-24V 40VA MULTI MT you get DC/DC converters, built-in isolation, thermal shutdown, over current protection and transient suppression all in one box. With this power supply, you'll experience lightning fast transient response, tight voltage regulation and superior output noise rejection.

A 600A, 277/480V-24V, 3-pole miniature circuit breaker. This breaker provides overload and fault protection for small motor loads (up to the Class EOP rating stated above).

The Y65 series is available in two versions - 277 VAC version and 480 VAC version, fully assembled and tested. Flexible, full wave bridge rectifier allows for operation on both ac voltages.

The 2-1/2 HP Johnson Controls S3-AR compressor is designed for medium temperature refrigeration or heating applications. Designed for liquid chillers, heat pumps and general purpose air conditioning, this scroll compressor's stainless steel liquid ring has increased capacity.

The receiver primary overload is a primary safety component of the overcurrent protective device. The receiver primary overload responds to thermal energy generated by the primary current in order to initiate a protective action. The most widely used protection method is "classification with current" that relied on the potential difference of the varistor to sense the primary current.