KMC Controls BAC-120036CW - - Controller, 3 Relay, 6 Universal Outputs

"FLEX STAT 3 RELAY

THE FLEX STAT 3 RELAY IS A HIGH-END CONTROLLER FOR HOSPITALITY SYSTEMS AND RESIDENTIAL APPLICATIONS. THIS DEVICE ALLOWS THE OPERATOR TO GO FROM ZERO TO 100% IN ONE SECOND.

The FLEX STAT 3 RELAY controller is a compact fully enclosed control circuit board with a USB connection. The relay outputs may be configured as normally open or normally closed with an option for remote on/off output. Six universal relay outputs are provided as well as three status LEDs.

FLEXSTAT 3 RELAY - CONTROLLER #120036CW. For applications requiring a combination of three different control functions, such as three starters or chiller controls, the BAC-120036CW is the controller of choice. The versatile BAC-120036CW can be configured to operate in three different modes: $@ Output Relays - Each relay provides an independent 24 VDC output with its own actuator terminal and adjustable delay time for fan coil or cold water applications. @$ Universal (Variable) Outputs - Six 24 VDC outputs can be used to switch or control virtually any electrical

FlexStat 3 Relay (12 Amp / 120/208V AC) is designed for use with larger commercial HVAC equipment, energy monitoring system and electric vehicle charging stations.

The FLEXSTAT-3 Relay controller / power module is an all-in-one, three-channel relay system with three NO/NC relay outputs that can be configured as 3 independent single-channel controllers or as one multi-channel controller improving setup and maintenance. The FLEXSTAT-3 Relay controller / power module has six universal inputs that can be user configured to monitor for multiple alarms and events such as: Exhaust fans, carbon monoxide detectors, low temperature thermocouples, pressure sensors for high altitude correction or fuel flow, air intake sensors for controlling recirculated air and infusion

The Flexstat relay, or FLEX AC Relay is designed as a flexible power source for control of multiple electromagnetic devices. These relays offer 120 Vac RMS, 8Amps per pole on independent contacts at speeds up to 10,000 operations/minute. They are very useful in switching various electronic loads such as solenoids, motors, and fans etc."

Free up valuable space on your mounting panel, by replacing 3 single pole AC solid state relays, with a single KMC 3 relay in-line switch.