KMC Controls VCZ-4102AMBD 1/2 inch Two-Way Pneumatic Zone Control Valve with 3-8 PSI Actuator (1.0 Cv)

"1/2"" N/O 2way 3-8# 1.0Cv"

For long-term, trouble-free operation, KMC controls valves feature a high-impact Marlex body and a high-strength Neoprene cushion packing N/O 2WAY 3-8# 1.0CV VCZ4102AMBD

This is a direct acting 2-way, 3 to 8 psi, 1.0 Cv air valve. It comes with a hand actuated actuator. This product is suitable for HVAC applications."

A two-way, normally opened pneumatic zone control valve with a manual change-over. Has a 1.0 cubic foot per minute flow capacity at 5 psi, 3/4"" NPT connection, 1/2"" N/O connection and 2 #8 size actuator ports for air supply. It has a residual pressure mode of operation and is diaphragm actuated.

A 3-way solenoid valve with a 1.0 cv. Connection Size: 3/4"- NPT Inlet Connection Type: Threaded Supply Pressure: 4-8 PSI"

The VCZ-4102AMBD 1/2" Two-Way Pneumatic Zone Control Valve allows off-on control of up to two zones via one actuator with its dual solenoid design. Each zone provides through ports for optional wired manual override, cut off only or feed only applications. A built in pressure transducer is also available for refrigerant flow control. These valves are commonly paired with the VBA-4100 Range Actuator, VCA-4042N Pressure Switch, or any other combination of manual or pneumatic actuators to provide multiple levels of user input and versatility

The VCZ4102AMBD Series pneumatic 2-section, 2-way valves are designed for controlling compressed air for pneumatic equipment. They are housed in a compact plastic case and have quarter-turn type controls. The flow characteristics are linear with minimal pressure drop.

A full line of standard and special purpose valves is now available from KMC Controls. Please contact us to discuss your project.

A better price for quality distributor than other distributors. We will support distributor to offer lowest distribution cost.

Pneumatic zone control valve controls the flow of gas to an offset two-burner or combination cooktop/broiler.

To create simple, cost-effective HVAC control, this valve comes with an adjustable pilot pressure to ease installation. The pilot can be locked to prevent tampering, safeguarding the valve against unauthorized operation, and the manufacturer-rated pilot output pressure is available through a pilot pressure override gauge. This KMC Controls valve ensures precise flow regulation down to 0.25 percent of nominal flow, keeping the system well within its operating range at all times.

Zone control valves, also called proportional valves, control air in heating and air-conditioning systems. They are capable of maintaining a designated temperature (zone) in heating and air-conditioning systems by means of proportional bimetal operation. Zone control valves can be installed at individual doors or ventilation registers to automatically balance temperatures within an area with variations in external or internal concentrations of heat.