Honeywell 107572 Pressuretrol SPST 10-150 PSI make on rise no "B" terminal

MERCURY FREE PRESSURETROL FOR OIL W

This Mercury free pressuretrol (TM) will operate easily with your existing electrical solenoid and only draws 6 watts of power.  This pressuretrol was designed to control the high-pressure side of the Mercury free oil burner valve (sold separately) and maintain safe pressure in the system.

Ready to breathe new life into your old heating system? The Mercury-free Pressuretrol upgrades your old pressure-release switch. It provides a way for you to manually control the pressure, making it easier and more efficient to run your heater through the fall and winter months.

The 107572 Pressuretrol is used with liquid-filled, mercury-free gauges and wishbone-style manifolds to provide oil flow control and pressure equalization for ­valves and equipment.

The Honeywell 107572 Pressuretrol model 107572 is used to control oil pressure from 0 to 150 psi. Includes allen wrench for adjustment and it is made in the USA.

The Pressuretrol prevents overfilling of oil tanks and reduces the number of times you need to check your oil level. The Control is set at the factory in 1-PSI increments, and has a range of 0 PSI to 150 PSI. It can be adjusted to 40-PSI increments by using the multi-turn potscrew located on the top of the valve. The Pressuretrol is designed for gravity discharge only and will not work with suction drafts or submerged motors.

Pressure is all around you. Even the push and pull of gravity can be thought of as pressure--below normal in your cellar and above normal on top of a mountain. The same force causes the water in a hydraulic jack to rise rapidly when you lift the handle. Without pressure, we could not have air-conditioning, hydraulic jacks, pumps or even bicycle pumps that allow us to repair flat tires. Pressuretrol has replaced dozens of different pressure regulators that control pressure in many types of equipment, tools and appliances.

Honeywell's Pressuretrol, model 107572 is an auto-reset pressure control switch for water and oil-filled heating and burner equipment. It has a maximum input pressure of 150 psi. The no "B" terminal for those applications where additional safety is not required.