Honeywell 287824 L4080B1352 "100/200F 1 1/2-3""Insul 8fDIF" "100/200F 1 1/2-3""Insul 8fDIF"

Immersion type Aquastat,100-200,Hig

The Honeywell L4080B1352 Aquastat: 100/200 F, 1 1/2" - 3" Immersion Type, 8 ft. C-11 Tubing If you are the original equipment manufacturer of or a contractor for commercial refrigeration, walk in coolers and freezer rooms, commercial kitchens or propane refrigerant systems, you need to make sure that your electronic components will work with every make and model. Honeywell is known as the world leader in innovat

The Honeywell L4080A1352 is a single element Immersion Sensor for use with 1" to 3" (25.4 to 76.2 mm) pipe. The L4080A1352 is an aggressive diaphragm design with an embedded temperature controller and uses the entire pipe as the sensing element. The immersion sensors are designed to be installed in a vertical position in water or steam pipe.For additional information about available versions of this product, please contact us: here...

100 to 200 degree F temperature range, 1/2 inch immersion depth, .125 inch lead hermetically sealed sensor, 8 foot lead length, factory mounted bayonet inlet connection with extension cable and seal, control box with a non-metallic frame, set screw type 3 dial

Honeywell Aquastats are designed to sense changes in water temperature and control hot water recirculation pumps, steam traps, domestic and commercial recirculation systems. They are also used as part of water control systems for solar and geothermal applications, as well as hot tub units.

The L4080B1352 is a self-contained, immersion-type temperature controller that can be used for a variety of heating and cooling control applications. It features an adjustable bimetal spring that controls the heating current to the load. The L4080 controller provides proportional and on/off current control with an output range from 0.1A to 10A using single ended inputs only. The controller has a terminal block accept input leads from 12 to 24 VAC or 12 to 48 V

The Honeywell 287824 L4080B1352 1 1/2" Insulated Outlet Thermostat is designed for indoor use in hydronic heating applications. It can be used with well, pump tank, hot water or domestic water systems. This self-contained thermostat is a temperature sensitive switch which provides variable resistance to the warm side of the circulating system. The thermostat is equipped with an adjustable limiting orifice set at 1 1/4". The control is fully

Honeywell L4080B1352 is a Type K dial thermometer that should be used for guidance in the design and installation of heating, ventilation, and air conditioning (HVAC) systems.