Honeywell 6874 Circulator Control Low Limit Aquastat Controller W/ 100 F To 200 F

REMOTE BULB AQUASTAT (100-200F 5-30

Remote Bulb Aquastat from Honeywell is single stage, adjustable for low and high temperatures. Multiposition cap allows easy installation.

Activate or deactivate a water heater circulator pump at an exact temperature to avoid unnecessary heating and wasted energy. This remote bulb aquastat is designed to work with water heaters from 35,000 to 80,000 BTU and includes a factory set limit of 175 F.

The 6874 is a thermostatic remote-bulb aquastat controller used for circulating pumps to either heat or cool aquariums. This weatherproof, ocean-blue and white-colored unit has a programmable setpoint adjustment wheel and displays the system operating temperature on an analog indicator. An optional display is available for cooling mode only, remote probe (part # 6650) sold separately.

The Direct-Mounted Aquastat is a sensitive control designed for use with the Honeywell 3-11 series mini-splits which are A/C units mounted on the outside of building... The aquastat should only be used in applications where the Low Limit is between 100F and 200F - it will shut down the outdoor unit before ambient air temperature reaches this range.

The Honeywell 6874 Circulator Control Low Limit Aquastat Controller W/ 100 F To 200 F Replaces Component #2874 is the item to find when you are building a sprinkler system. Designed to provide sub-base protection for the circulator, this tubular plug limits the temperature of the protect water at a maximum of 200 degrees Fahrenheit.

This low limit aquastat controls circulation pump on high limit thermostats. This UL listed cord with plug is equipped with an emergency "red" reset button to help the user in trouble shooting problems that may occur and eliminates the need for additional wiring for reset. A small green light indicates when power is on through the lead wires. Green and red lead wires are factory connected. If you only use one fixture, drill two 1/8" holes 8" apart in the mounting plate, and hook up wires as indicated on the enclosed installation sheet.

The Honeywell 6874 4-wire 1/2" circulator control with a remote 100' 1/2" copper low-limit aquastat. Quick Change terminals allow for easy hookup of 2 wires and 2 wires for the power supply (cable and transformer sold separately). This controller features a locking connector to prevent accidental disconnects and a mounting bracket to mount the controller to a wall or baseboard.