MOTOR, 5.7" 24 VOLT B/B 2 STAGE TANGENTIAL BYPASS
The Lamb L-116157-00 MOTOR, 5.7" 24 VOLT B/B 2 STAGE TANGENTIAL BYPASS is used on models in the following series: 1900P.
The LAMB L-116157-00 MOTOR, 5.7" 24 VOLT B/B 2 STAGE TANGENTIAL BYPASS is a new replacement part manufactured by LAMB, a leading manufacturer of machine tool accessories.
The electrically operated L116157-00 is a motor, 5.7" 24 volt B/B 2 stage tangential bypass. This new replacement motor is designed for use with the Model 1037, Model 1039C and newer hi-flow mixers. This replacement motor is also compatible with the older VMS (Vacuum Mixer Systems) models Model 1016 mixer, models 1971, 1974 and 1980 (pre-1987) hi-flow mixers.
-5.7" 24 Volt B/B motor with 2 stage tangential bypass and bunson burner ignition
Our 5.7" Shaft (NEMA) motor provides 240-Volt/5,000 RPM or 120-Volt/3,000 RPM. The L-116157-00 has a series of small brushes that provide 2-stage tangential bypass. With precise speed control of up to 2,400 RPM, the bypass contactors are great for long term combined loads from a single starter. This is the direct replacement for BALDOR Motors requiring replacement.
This part is a 5.7 inch universal motor with 24 volts and 2000 RPM. The Camlock mounting variant of the four-pole, DC electric motor is designed in compliance with IEEE 1060-1993 (R1998). These two-stage tangential 1/8 hp DC motors are constructed primarily of cast aluminum or plastic housings (and marked on top with an abbreviation of the manufacturer's name or an abbreviation indicating that it is a direct replacement for an earlier camlock model). Our parts meet or exceed original manufacture specifications.
The electronically controlled motor features a 2-stage tangential bypass that offers consistent 1,850 rpm speed at zero load and 1,450 rpm with 10 ft-lb of torque. Can be used as a step motor on an OTC Model 300 rework station using the 48PA0630 table adapter.