Lamb L-116883-00 MOTOR, 5.7" 120 VOLT B/B 2 STAGE FLOW-THRU

MOTOR, 5.7" 120 VOLT B/B 2 STAGE FLOW-THRU

Lamb L116883-00 MOTOR, 5.7" 120 VOLT B/B 2 STAGE FLOW-THRU

LAMB L-116883-00 MOTOR, 5.7" 120 VOLT B/B 2 STAGE FLOW-THRU

Motor, 5.7", 120 VAC, B/B/, 2 Stage, 1 HP + 1/4 HP (#4/W) ----- For additional product information and prices, visit our web site at www.motorizingamerica.com

The Lamb L-116883-00 Motor for the Lamb 5.7" Blowers is a replacement motor that is designed for use on two phase equipment. This motor is a 120 volt B/B and has the following features: 2 stage flow thru, 480 RPM. The Lamb L-116883-00 Motor for the Lamb 5.7" Blowers is a self contained, V belt driven unit. It is hardened.

The Lamb L-116883-00 Motor is a 5.7" (14.5 cm) motor for use on their pool pumps or submersible pumps. It is 120 volt, single phase, two-speed and comes complete with a squirrel cage fan, impeller, cartridge, bolt kits & brushes. The motor can be submerged in water or fluid up to specified maximum depth limits and speed can be adjusted as needed or desired to achieve max flow and pumping pressure.

The L1-116838-00 motor has a 5.7" diameter. The motor mounting plate is 6.25" wide and 4.625" long which would require a mounting hole pattern of 1.125" (square) per side, at 4.625" center to center, with adjustable ears at 9.25" on center spindle to flange distance.

With the Flow-Through motor you get air and fuel through every part of the motor. Just like a smog pump motor but better. All now come with 4" rectifier wire connections, (no more crimping or using too large a screw and possibly shorting the wire.) And we give you 4 feet of flex cable, and 10 feet of power cable so you can build exactly what you need. The internal parts are all American made. And the pump plate is machined from billet aluminum which is very rigid compared to stamped steel plates that can have high spots where they deflect off at an angle when mounting.