LENNOX 12W66 Corporation 1/4HP 240V Blower Motor

1/4HP 240V Blower Motor

The Lennox 1/4HP 240V Blower Motor is motor used to circulate the air in your home. This blower motor is designed for use with Lennox XC2 Forced Air Furnaces & Heat Pumps and Lennox XC21 Forced Air Furnaces and Heat Pumps.

The Lennox 12W66 - 1/4HP 240V Blower Motor is constructed of a sturdy, long-life carbon steel attached to a water-resistant sealed ball bearing housing for use in commerical and residential HVAC systems.

The 12W66 Blower Motor is a 1/4 HP, 110V, .9A, 3450 RPM, 34.3/36 DB Hz, 115/208V AC Max speed forward / reverse micro switch start blower motor for Lennox 1/2" x 4 3/16" Diameter blowers.

Our BLOWER MOTOR consists of our top quality 1/4HP NON-OVERLOAD BLOWER MOTOR ROTARY UNIT and our ELECTRICAL SWITCH. This is a complete blower motor assembly that is light weight, has high CFM (cubic feet per minute) and high speed capabilities.

The Lennox 1/4HP Blower Motor with Rotation stops your leaking air handler or blower impeller from overheating and burning out. This motor can also be used on the following models: Air King/York, CinQuartz/American Standard, Coleman/York, Comfort Products/Broan-Nutone, Continental Electric, Craftmade/Estate.

This Lennox Blower Motor is designed for use with forced air heating, cooling and ventilation systems. It has a diameter of 5 inches and includes a 1/4HP permanent split capacitor with ground wire, #18 insulated copper leads, C-face mounting, 7.5' power cord with plug to the motor terminal box, and a thermistor. You will need to heat the furnace blower by turning on both thermostats and then turning off one of them. The blower should run for at least five minutes before you do this.

A standard of excellence in air distribution performance, the Lennox G862 1/4 hp direct-drive blower motor and brush assembly is designed for use with Heat Duct Wraps. A direct-drive fan design for reliable, efficient operation. Lennox can help make your heating and cooling system work better for you.