LENNOX
Lennox 12L77 1/3HP 460V BLWR MOTOR
1/3HP 460V BLWR MOTORWe installed a Lennox 1/3HP 460V BLWR MOTOR in your home. It will greatly reduce the amount of space needed to install ductwork, which can cost up to 50% less than what is...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account1/3hp 1ph 230/203v BLWR MOTOR
The 13H37 1/3hp 1ph 230/203v BLWR MOTOR by Lennox is an air handler designed for installation in commercial walk-in units. It is designed for installation on a celling or suspended from the rafters, and features a built-in centrifugal blower motor with squirrel cage induction blower wheel. Please click on the image to see more product features.
-13H37 1/3hp 1ph 230/203v BLWR MOTOR
This Lennox 13H37 1/3hp 1ph 230/203v BLWR MOTOR comes with a limited lifetime warranty.
The Lennox 1/3hp 1ph 230/203v BLWR motor is made to last you for years to come. This premium Lennox motor is designed to provide high efficiency levels, longevity, and reliable performance. You can load this 1/3hp, 1575RPM motor with a heat pump system, and the continuous run time won't exceed 6 hours. It has class B insulation as well as a permanent split capacitor. The Honeywell Harmony II thermostat comes with the motor as well.
- 1/3hp, 230/203v, 3-phase BLWR motor with 14x10x5 permanent split capacitor - Rated continuous duty - Rotation: CW - connections: terminal leads - Lift capacity per foot of belt: 4,000 lbs. For belt ratings go to www.uslinc.com under the "Belt Ratings" tab and follow the drop down menu.
120VAC 13H37 1/3 HP BLWR Motor. Lennox Type: 1/3 Phase; Voltage: 230; RPM: 1560; Frame: H; Suspension: Ball Bearings; Listing Agency Standards Compliance: UL; Full Load Amps: 1.1A @ 230, Frame B, Figs. 0-87 Notes: Ball & Sleeve Bearings, (2) Terminals
This Lennox® 13H37 air-cooled motor, 230/127V Wattage: 1/3 HP, Voltage: 230/127V 60Hz, RPM: 1725/1170, Frame: BLWR - Blower Wheel Replacement is an air-cooled, scroll type induction motor that cools by natural convection through a ventilated front bearing. This motor is manufactured using cast iron and steel parts for long lasting durability. The PCB, or printed circuit board, has current overload protection to prevent damage to the motor in case of a short circuit.