LENNOX 66463 Corporation Potential Relay

Potential Relay

Our Potential Relay offers outstanding dependability and load-handling capacity in a compact package. It is offered with or without controls, providing maximum applicator flexibility. An extensive array of terminal strip connections (3/8" x 24tpi) accommodates numerous possibilities. Numerous mounting features allow the user to install the potential relay in a number of different locations.

Lennox174; Potential Relay Is A Current Sensing Relay Kit For 120VAC Single Phase Heat Pump Systems

The potential relay is a ceiling-mounted, single-spaced enclosure designed to contain up to four potential relays in a single T1 or PRI (E1) telecommunications room. The enclosure is provided with single or multiple cable entrance and exit for conductor terminations.

The Relay has the new "D"-shape zinc alloy contact point with a self-cleaning, gold flashed finish designed specifically for use in the Lennox® furnace environment. Features standard 0-1 ohm resistance and 20Amp rated current capabilities. The steel body is sturdy and corrosion resistant and features a reliable mechanical latching mechanism. These relays are designed as replacement components for use where the stock? style potential relay was originally used. B 391801 021RC P 1

This potential relay is a switch intended to be used for short-circuit protection in residential and commercial air conditioning and heating systems. The relay is a DPDT (Double Pole/Double Throw) device with normally open contacts, configured as Normally Closed. The contact rated for 30 amps, 125 volts with a maximum of 30 ma current draw. The capabilities of the relay have been successfully tested to NEMA Standard C78.17

The 66463 is a potential relay that can be used with Lennox Air Conditioning and Heat Pump Systems. The relay provides cooling on demand and is capable of reversing the flow of refrigerant. This product is used to control additional cooling at a second indoor unit to provide dehumidification during peak cooling periods.

The Potential Relay (RXC) will accept a +24vdc supply and will activate when a load reaches 6.5 volts. This relay is recommended for use with a +12v lighting system. It also features an over-voltage trip that cuts off current when the +24vdc exceeds 21.5 volts