LENNOX 72W67 Corporation 7.5HP 460V 3Ph Blower Motor

7.5HP 460V 3Ph Blower Motor

The Lennox 7.5HP 460V 3Ph Blower Motor is one of the best to use in your heating and cooling system. It runs with at least 7355 Max RPM and is rated at 7.5 HP. With this, there is an increase in the airflow of up to 50% and improved energy efficiency as well.

This Lennox 7.5HP 460V 3Ph Blower Motor is for use with Lennox top- and wall- mount heat pumps. It can also be used as a replacement motor for older systems or with portable air conditioners

The Lennox 7.5 Hp 460V 3Ph Blower Motor provides powerful performance for your home, and featuresa compact design that is a perfect fit for smaller installations.

The 72W67 is a three phase 7.5HP 460V series-wound DC capacitor start, self-regulating blower motor with built in overload protector and no-load conditioner. Blower has an efficiency of 92% @ 75'. Nominal horsepower of 7.5hp. The motor's frame size is 82C. Frame is round steel opening at bottom for belt attachment. Packaged with indoor coil

This new Lennox 7.5hp Blower Motor is a non- common name motor that fits a few furnace models.

Blower Motor, Voltage 460, Blower Motor Frame Size 72W67 , Air Flow 208, Blower Shaft 3/4, HP 7.5 , Amps 8.2, Volts 460, RPM 1500

The 4-pole, permanent split capacitor is available in 115/230 volt and 3 phase 460 volts. It features slip rings on the frame for simple mounting. The bearing cap and connecting hardware are ground connections bonded to the shaft. The rotor is designed for compensated vibratory service to limit vibration inherent with all blower motors. In addition, all commutator segments are stamped from sheet steel using electroformed nickel alloy. This process makes them resistant to wear, yet allows enough electrical output for direct connection to the armature. This blower motor has an adjustable speed range of 500–1400 RPM at a starting voltage of