Lennox 59M48 3/4HP 3Spd Blower Motor 3/4HP 3Spd Blower Motor

3/4HP 3Spd Blower Motor

Lennox brand 3/4HP 3Spd Blower Motor

The Lennox 3/4HP 3Spd Blower Motor is a Blower Motor with an external rotor. It has 1/8" shaft and a 4 pin plug. this blower motor will begin motorizing the system or fan when it reaches the full speed of the selected speed control. This motor runs at 3650 RPMs.

This 3/4HP shaded pole motor has a 5' power cord and is 3 speed (off, low, high). This blower motor has a snap-in blade and is configured for 115/230 volt. It has a maximum air flow rating of 2,000 cubic feet per minute.

The Lennox® 3/4HP BLOWER MOTOR is suitable for a furnace or boiler application requiring a three-speed blower motor. The 59M48 Blower Motor has a central shaft and aluminum fan blades. Centrifugal switches are included in the 59M48 Blower Motor.

The Lennox 59M48 3/4HP Blower Motor is ideal for a variety of applications, like heat pumps and air conditioners. The motor is made of copper and steel to reduce vibration and protect against corrosion. The blower motor works at Fan Speed 3 and peaks at 4680 CFM. The device has a Thermal Overload Protector that helps ensure reliability and durability.

The Lennox® 59M48 is a three-speed, 115/230V, 3/4 horsepower squirrel cage fan motor with a 1/50 (60HZ) or 1/60 (50HZ) duty cycle. The 59M48 is the replacement for the following fan motor part numbers: U2E56C826, 06E5298, 07K4148. This blower motor has a capacitor start with thermal overload protection which includes an adjustable auto reset thermostat and an internal short circuit protector. The 59M48 also has a starting resistance that will not exceed 4 ohms

This product adds comfort to your everyday life and helps promote a consistently comfortable indoor environment. The 3/4 HP air handler provides fresh, quiet, efficient air circulation and exhaust ventilation. Add-on heaters are available for winter heating or as a backup source of heat.