Honeywell 12321 , Inc. 150 lb-in Floating Modutrol IV Motor, 24 V

24V ACTUATOR FLOATING CONTROL 150 L

This is an Actuator for the Honeywell Floating Control 150 lb-in. This actuator is a 24V AC/DC, it is used with models such as the Honeywell 2300 Series Floats, and the Honeywell 2400 Series Floats.

Actuator, floating control, 24 VDC, 150 lb-in, 110 psi. 2W screw.

The ACTUATOR FLOATING control is suitable for applications where a variable speed drive must be positioned away from the load. This includes mobile, industrial and marine applications. The control automatically compensates for torque reaction on the output shaft and maintains the output position in accordance with the command signal. This floating control is completely manually adjustable.

This 24 V floating control is ideal for use on boats, caravans, and motorised water craft. It includes a single-speed direct drive motor that operates on a 10:1 gear ratio, an aluminum housing with stainless steel cover plate and a black/white ABS junction box. The adjustable auto-sensing circuit works with the controller to maintain a constant speed to eliminate torque variations caused by large loads or steep grades.

Honeywell's Floating Control Modutrol IV Rotary Actuator is the ideal replacement for most loss of motion or failed applications. The Floating rotary control was designed to prevent floor damage due to jams. This single channel actuator has been engineered to withstand extreme shock and vibration loads. A 24 VDC solenoid is required and sold separately. A300-5015.01, 07310-1003, 0921-5001, 0921-1005, 1221-5018

The Modutrol IV is a UL Recognized, 4 wire, 24V DC Actuator that converts a single-ended voltage from 0-10V or DC to MODulating control of 24VDC Motor/Fans/Springs. It may be used in place of our most popular and economical Non-Grounded controller for motor/fan applications. Since it is in the floating control mode, the position of the motor is not critical.

The floating control motor adapter comes with your choice of a No Voltage GND, 3-30 V or 0-10 V signal in. These motors are self driving and allow accurate position control down to +-1 arc second with 24 volts of DC power.