Wall Mnt 2% Hum. Sensor
The MAMAC HU-225-2-MA Systems Wall Mount 2% Humidity Sensor is used to monitor the level of humidity in a closed room.
The systems Wall Mount Humidity Sensor allows a thermostat to monitor connected HVAC equipment relative humidity as an input. This sensor can be mounted on a wall or panel, and indicates a localised 2% humidity threshold by flashing the sensor LED at that point.
A wall mount sensor for a standard wall-mounted thermostat in 2% Humidity, manufactured by MAMAC Systems.
Wall mount up to two 2-wire sensors. The system provides power and a source to prevent 2% humidity sensor signal dropouts
MAMAC Systems Wall Mount Humidity Sensor, Bronze, 0 to 100 Percent, 2 analog outputs (1 switchable from 0 to 10 VDC), Life expectancy 15 years (at 25 C ambient temperature), Accuracy 2 percent RH, Humidity range 5 to 95 percent RH, HVAC control wall mount application sensor, Includes installation and operation instructions
Wall mount 2 CAN (HUM) BUS outputs. Used in conjunction with a MAMAC Display for 2 CAN (HUM) BUS inputs
The HU-225-2-MA Humidity Sensor can be connected to MAMAC Systems devices to report the relative humidity of air in your room. It is compatible with MIMO Power Line, MOKA Control, and most other devices that support MAMAC Sensor inputs.