MARTYR ANODES
MARTYR ANODES194-CMR04 5 ZN RUDDER ANODE
The martyr anodes are made of 5 zn rudder anodes. They are designed to improve the performance of your electric boat by increasing the amount of power that your battery can deliver.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountRUDDER ANODE SET 5IN DIAMETER
MARTYR ANODES194-CMR04S RUDDER ANODE SET 5IN DIAMETER, FORMERLY 194-CMR04S,
This set includes six 5" diameter I-Shaped anodes that are zinc plated steel to provide corrosion resistance and protection
USE WITH OUR SS4, 8, 10 PORT ANODE KITS
A rudder is mounted at the aft end of a boat or ship, while a propeller is mounted in the water at the forward end
THE MARTYR ANODES™ ARE MADE FROM THE VERY BEST HIGH STRENGTH ALLOY STEEL, THEY CAN BE USED TO REPLACE THE TYPICAL ANODES AND ARE AVAILABLE IN OVER 50 DIFFERENT SIZES
Protecting your boat or yacht is just as important as building it
The blade may comprise a solid metal surface, or it may be somewhat hollowed to reduce weight and increase strength
Each consists of a metal blade or disk shaped device attached to the hull, such as by welding or bolts
A rudder anode is one of the most overlooked yet vital parts that’s need to be replaced on a regular basis to ensure your boat stays in top shape and it’s no surprise why
The unique construction of these anodes gives them high resistance against corrosion due to their dense structure and intermingling of hard steel particles with soft iron oxide in the matrix
The rudder and propeller anodes are designed to protect the boat's most vulnerable steel parts from corrosion
This leads to a longer life span than other common materials used in the manufacture of marine anodes
Anodes are designed to stop galvanic corrosion on the hulls of boats and can help extend their life by years
F cast steel and epoxy coated
The anodes are soldered together and connected to a brass ground strap
LANDNSEA RUDDER ANODES PROTECT YOUR RUDDER AND STEERING SYSTEM FROM DETERIORATING CAUSED BY EROSIVE CHLORIDE
The entire assembly is galvanized steel for added durability
The material is high strength, low alloy steel and the anodes are molded by a special process
ANODES194-CMR04S RUDDER ANODE SET 5IN DIAMETER
FOR BOATS, PWC'S & MARINE DIESEL ENGINES WITH RUDDER OR OIL BATH ANODES
These #4 size zinc anodes will fit most boats up to 30' in length
The Martyr Anode sets are manufactured from ASTM A153 Gr
FOR BOATS, PWC'S & MARINE DIESEL ENGINES WITH RUDDER OR OIL BATH ANODES
These components will attract corrosive elements to them and then leach that material back into the water
The product is a rudder anode set
The product will be delivered at room temperature
Protect your vessel with the Rudder Anode Set