MOTORGUIDE702-8M4004173 PROPELLER-KATANA 2BL 3.5IN HUB

PROPELLER-KATANA 2BL 3.5IN HUB

The Propeller-Katana 2 Blade propeller is perfect for most outboard applications and can be mounted on a pull behind motor. Three blade metal propellers are a better choice for high performance applications, especially on low horsepower motors that require improved acceleration and for boats that are hard-planing or in rough water. The Katana 2-bladed aluminum propellers feature 100 percent pure brushed stainless steel construction. It also includes stainless steel hub, spinner plate and drive sleeve.

MotorGuide's line of Propeller-Katana® prop-drives are set apart from all other propeller drive systems by a patented rudder and water jet system that has the ability to move a boat laterally or vertically in very tight quarters. This technology not only allows for quicker turns, but also requires fewer drive motors resulting in significant savings on initial cost as well as lower operating costs.

The Katana Propeller is a great replacement propeller when the original one has been damaged, or it can be used as an upgrade to increase the performance and fuel economy of your motor. This MotorGuide Propeller is made for many different outboard motors.

The Katana propeller offers the same blade area as the 24-21-22 for lower rpm and faster plane speeds. The tapered blade area is designed to give better top end sound without sacrificing low end torque and response. This will give great performance from the ECO to SX2 versions of the engines.

Your trolling motors and propellers are your lifeline to the fish. KATANA's new Propeller­—the largest polycarbonate propeller on the market—gives you the power to conquer big water and big lakes. You get a much larger surface area in the water, which generates an increase of up to an additional 300-hp. On top of that, this new prop runs cooler and creates less drag than previous models, all while delivering more thrust. Put this prop's extra thrust to work boosting your boat past long distances and into tournament wins!

Katana stainless steel propellers are designed to fit recreational boats. Slender, long blade design creates maximum water flow for better thrust and increased performance. Available in anodized aluminum or solid metal with marine coating for corrosion resistance. See Class B blades for use on slow-speed engines under 300 RPM.

The 3.5in diameter x 4in pitch Runabout propeller was specifically created to properly balance and propel Yamaha's smaller outboard powered watercraft. This paddle style propeller offers incredible value for the cost.